1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Turn signal assembly

Discussion in 'Builds and Fabricators Forum' started by Cj4ever, Jul 17, 2013.

  1. Cj4ever

    Cj4ever New Member

    It's been a while, but I'm finally working on my '73 CJ6 resto. I searched the forum and everywhere else. Can anyone point me to a supplier for the turn signal assembly? Mine is almost beyond restoring.

    I also thought when I disassembled it the grille had the welting where the hood meets, but research tells me it just used bumpers. Can anyone clear that up too?

    Thanks!
     
    Cj4ever, Jul 17, 2013
    #1
  2. 68BuickV6

    68BuickV6 Well-Known Member

    What is almost beyond restoring?
    The actual switch that mounts on the column? Is anything salvageable? From time to time someone posts looking for parts for the column mounted assemblies.

    As far as replacement ones, assuming you don't mind them not self cancelling, autozone and napa both carry them IIRC.

    I know ebay is a good source aswell.


    On top of the grill, where the hood rests, welting was used. I still have the factory welting on my grill.
     
    68BuickV6, Jul 17, 2013
    #2
  3. nickmil

    nickmil In mothballs.

    Put an ad in the classifieds for the turn signal switch. Someone here probably has a rebuildable or good unit collecting cobwebs. As for the welting might try Hermtheoverdriveguy. He was selling it but with rivets instead of the clips.


    Sent from my iPhone
     
    nickmil, Jul 18, 2013
    #3
  4. Cj4ever

    Cj4ever New Member

    Thanks for the feedback. I went to PA Jeeps show this weekend and now can refurbish an original Spartan signal. I'll try hermtheoverdrive guy for the welting; didn't have any luck finding that at the show.
     
    Cj4ever, Jul 23, 2013
    #4
  5. Turk P

    Turk P Member

    I have a turn signal switch off of my '68 collecting cobwebs out in the garage. If you need it let me know.

    Steve
     
    Turk P, Jul 25, 2013
    #5
  6. JeepinJewels

    JeepinJewels New Member

    I've wanted to refurbish my Spartan signal switch & was wondering if the info you got from the show was a kit or something like that. If you didn't need the switch from Steve, I'd be interested.

    Julie
     
    JeepinJewels, Jul 25, 2013
    #6
  7. iharding

    iharding Quitter

    Walck's has the hood welt:

    [TABLE="width: 650"]
    [TR]
    [TD="align: left"]1[/TD]
    [TD="align: left"]Top of Grill Welt With Rivets CJ5, CJ6 [/TD]
    [TD="align: left"]681191-CJ5[/TD]
    [TD="align: right"]$13.60 [/TD]
    [/TR]
    [/TABLE]
     
    iharding, Jul 25, 2013
    #7
  8. Turk P

    Turk P Member

    It sounds like CJ4ever fixed his turn signal switch so JeepinJewels if you still want the switch that I have it's yours.

    PM sent

    Steve
     
    Turk P, Jul 28, 2013
    #8
  9. JeepinJewels

    JeepinJewels New Member

    Steve, PM sent to your email earlier today.
    Julie
     
    JeepinJewels, Aug 5, 2013
    #9