Seat Belt Sholder Anchors

I'm looking for pictures of 3 point seat belt sholder anchors but feel free to show all anchor points.

I’m also looking for 2nd row sholder anchor ideas. I currently have just a later cj roll bar so that will be new steel.

Current plan is to weld a tab, drill and sleeve, or weld a tab to a cage clamp (preferred).

 

I use something similar to this. drill through the entire tube, slide this in, weld it up on the front and back. If you use a shoulder bolt to hold the belt, it'll swivel like a factory mount.

https://www.amazon.com/Cecco-Racing-Weld-Harness-Mounting/dp/B08RXH2B2P

 

When I was running 3 point belts, this was the shoulder belt guide.


The shoulder belt reel anchor:

 

That is what I used.

 

I was looking at these, don't know any pro's or cons but Weld an ear for the guide and be able to adjust iit up and down without risk of drilling and welding it in the wrong spot on my pretty roll bar.


BZBMGMO Split Collar Tube Clamp, UTV Universal Connector Weldable Tube Clamps,Short Connector Tube Clamp 1-3/4" Qty 2 https://a.co/d/69WSCSW