If I can pick you guys brains a little further. Trying to "clock" the wiper blades now that linkage is in and running smooth. I have heard/seen...
Nutserts drilled out surprisingly well, just like you would do to a rivet. I used some silicone to hold gasket in place which I think will be just...
Ok, so I got the kit from Barneys, very complete and nicely made. Before I installed I wanted to see if there was a better way to screw/hold the...
Thanks guys for the feedback. Aftermarket is hit and miss at best. I did order the kit from Barney and going to give it a try because it does come...
Having same problem as before where wipers will work just fine for about 4-5 cycles then bind to a complete stop. I have taken linkage apart,...
rejeep, not sure what or why you are saying "just so wrong as an across the board statement". I sure as heck don't care that WIX or any other...
To each his own, but AC delco filters are nothing more than re-packaged FRAM filters which are constantly being show their filtration/micron...
To date, Mann-Hummel is still making Napa Gold & Platinum filters. I was definitely having drain back issues with the Napa Gold 51258, not sure...
IMO, one of the best things noted was to get a coolant system pressure tester. Pump it up to 16psi and let it sit and see if it bleeds down. If...
It is as aftermarket/foreign as they come. It has always been a contention point when I purchased the Tub/Fenders/Windshield Frame from...
Bushings and everything else still look new. I took entire linkage back out to make sure arms were not bent and they were fine. I was able to...
Plastigauge is your friend. Don't guess while you have it this far down. Get the specs and check it with plastigauge. Napa or many other places...
After the restore, my windshield wipers worked fine on either speed and they self parked when I turned them off. Raining the other day, turned...
Separate names with a comma.