-
Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.Dismiss Notice
Recent Activity
Activity stream for all registered members at ECJ5.
-
sterlclan replied to the thread Need Some Help With My 1972 Cj5.
those dumbass bolts are stock
May 7, 2024 at 5:19 PM -
homersdog replied to the thread Timing Tensioner Bolt.
I know this is an old thread, but I wanted to update that parts dude 4x4 has these tensioner bolts available for $15. Just is case...
May 7, 2024 at 5:06 PM -
oldtime replied to the thread T18 Adapter Questions.
Fino, in case you wanna swap this is the one I can haul to Colo. It’s a Ford 6.32. The main shaft was changed over to a Jeep main shaft...
May 7, 2024 at 4:56 PM -
Desert Runner replied to the thread Can A Mechanical Pump Pull Fuel Through A Non-running Electric Pump..
I have done this setup, my electric fuel pump does not flow when not powered, in either direction. So I come out of the tank and I...
May 7, 2024 at 4:51 PM -
FinoCJ liked Fireball's post in the thread T18 Adapter Questions.
I was following the Novak GM to Ford T-18 procedure you linked to on a Ford case. I didn't like how Novak wants you to drill and tap...
May 7, 2024 at 4:41 PM -
Norcal69 replied to the thread T18 Adapter Questions.
The standard short GM input shaft stickout is only 6.5". That short input shaft with gear being only 9.1" sounds about right to me....
May 7, 2024 at 4:39 PM -
colojeepguy replied to the thread T18 Adapter Questions.
I could stash it in a corner of my garage for awhile if that helps.
May 7, 2024 at 4:37 PM -
Dandy liked PeteL's post in the thread What's Causing This Carb Jet Corrosion?.
On the small engines, yes. Also adding Seafoam on a regular basis.
May 7, 2024 at 4:35 PM -
Beach66Bum liked Fireball's post in the thread WTB Mid 50’s Autolite Park Lamp (pair).
Kaiser Willys has 2-wire repos with glass lenses:...
May 7, 2024 at 4:20 PM -
Beach66Bum liked Rich M.'s post in the thread Can A Mechanical Pump Pull Fuel Through A Non-running Electric Pump..
In general yes, commonly done. Carburetors only need 3-5 psi.
May 7, 2024 at 4:18 PM -
Beach66Bum liked T. M.'s post in the thread Can A Mechanical Pump Pull Fuel Through A Non-running Electric Pump..
A while ago, my electric pump clogged up on me and stopped all fuel flow. 2 hours and lots of gas inhaled later, I decided I'd go ahead...
May 7, 2024 at 4:18 PM -
FinoCJ replied to the thread T18 Adapter Questions.
I was thinking Scott.....STL is a bit out of his way, and he'd have to do it in both directions
May 7, 2024 at 4:17 PM