-
Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.Dismiss Notice
wheelie's Recent Activity
-
wheelie replied to the thread Transmission And Transfer Case Oil.
I thought GL-1 was actually the stuff we’re supposed to be using and was spec’d for our old slugs.
May 21, 2024 at 6:13 AM -
wheelie liked Oldpappy's post in the thread Transmission And Transfer Case Oil.
Just bought a 2 gal jug of the "Traveler" 90 wt GL-1 from Tractor Supply Company this evening. It was about $40. GL-1 works fine in...
May 21, 2024 at 6:08 AM -
wheelie liked colojeepguy's post in the thread Transmission And Transfer Case Oil.
I tried a synthetic 75W90 GL4 (different brand) in my T90 once, it didn't shift well.
May 20, 2024 at 8:02 PM -
wheelie replied to the thread The B3 3b Attempt.
Just ordered all the hangers. Hope to see them by the next weekend.
May 19, 2024 at 11:09 PM -
wheelie replied to the thread New T18 Issues Maybe Not Hydraulic Clutch Related?.
Late to the dance here but I'm curious how the downshift from 4th to 3rd is. I assume it is fine since there was no mention of it also...
May 19, 2024 at 11:07 PM -
wheelie liked maurywhurt's post in the thread Driver Height Question.
I'm 6'-0", and driving my '67 the with stock front seats (which sit an inch or two lower than the repro seats sold by Rugged Ridge,...
May 19, 2024 at 11:02 PM -
wheelie liked timsresort's post in the thread Transmission And Transfer Case Oil.
I was in Walmart today looking. Only had GL-5. Sal at Vintage Jeeper just this week posted a test he did with a brass blocking ring...
May 19, 2024 at 9:46 PM -
wheelie replied to the thread The B3 3b Attempt.
Got the bolt on stuff removed from the frame today. The axles are original to my '71 and will find their way back to it. The Rancho lift...
May 19, 2024 at 9:30 PM -
wheelie replied to the thread Hoist The Jib.
First hoist. Kind of a test. Just a flanged 44. What.....175 pounds....maybe. I dunno. I measured some slight deflection in the post. I...
May 19, 2024 at 9:16 PM