1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Date my steering column please

Discussion in 'Builds and Fabricators Forum' started by 47v6, Mar 10, 2016.

  1. 47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    Please disregard the flange I have welded on to place this column through the floor board. Its part of the one that existed to bolt it to the dash. I would like to better refine my parts search to rebuild this column as in bearings and a horn. Thanks a lot guys.
    [​IMG]
    [​IMG]
     
    47v6, Mar 10, 2016
    #1
  2. nickmil

    nickmil In mothballs.

    Either a modified '72-'75 CJ or a '75 and older DJ. '76 and newer DJ's used a larger diameter tube and different wheel/horn button.
     
    nickmil, Mar 11, 2016
    #2
  3. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    I thought of Rodney dangerfield. Or was it Benny goodman? Take my wife. Please.
     
    sterlclan, Mar 11, 2016
    #3
  4. 47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    Henny Youngman. Now that we know this, we are officially super ancient artifacts.
    Yeah Nick, I cut off the flange than bolts to the dash on a CJ5, cut it and welded it to the bottom where it is used as a locator to bolt it to the floor in my cj2a monstrosity. It needs new bearings for sure. I think its gonna work swell. I think I might like it more than the tilt from a purely esthetic standpoint.
     
    47v6, Mar 11, 2016
    #4