Where the cable attaches to the lever on the transfer case? If you got the pin that attaches the clevis to the lever then, yes, it should come...
Owner couldn't get the lathe to work but has since got it running, purchased additional tooling to sweeten the deal. Doesn't make sense to me to...
Could be the inner wheel hub seal. That fluid (gear oil) should be much thicker in consistency than brake fluid. Brake can get brown and dirty...
Or grab a 5.3 or 6.0 outta the yard. Probably a lot of work to make it work but they run forever. Friend has a 5.3 with just under 400k on it.
I thought GL-1 was actually the stuff we’re supposed to be using and was spec’d for our old slugs.
Just ordered all the hangers. Hope to see them by the next weekend.
Late to the dance here but I'm curious how the downshift from 4th to 3rd is. I assume it is fine since there was no mention of it also being hard.
Got the bolt on stuff removed from the frame today. The axles are original to my '71 and will find their way back to it. The Rancho lift springs...
First hoist. Kind of a test. Just a flanged 44. What.....175 pounds....maybe. I dunno. I measured some slight deflection in the post. I may have...
Separate names with a comma.