1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Jb Weld

Discussion in 'Quitters' Club' started by Twin2, Nov 2, 2018.

  1. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    had a whistling noise in the new/used jeep renegade I bought a few months ago
    you could really hear it when you were taking off . took it to dealer shortly after I bought it . they said nothing wrong with it . normal they said :steamed:
    long story short I had a young kid look at it . he's one of those tuner guys . you know the import crowd with the hopped up cars . he told me . just by riding in it . sounded like a turbo leak :confused: . now this car is a 2015 with 15K miles on it . so he said to start by removing air inlet hose off of turbo . and spin turbo by hand .
    just to eliminate any issue with turbo . just my luck you had to remove the air filter upper housing to remove hose . well you also had to remove the engine cover too . no big deal . I wanted to see under it anyway
    IT turned out . when the dealer serviced this car before it was put on lot , when the mechanic changed out the air filter he broke a hose nipple . that hose that was open now . went all the way back to the big hose from intercooler to intake , so this is where the whistling was coming from .
    checked online line for a new top . 170 dollars for the complete housing :shock:

    so off to auto parts store for some JB Weld . 24 hours later . as we say watching paint dry . it's fixed
    picture of engine with cover off
    DSCN0152 - Copy.JPG
    air filter repair
    DSCN0153 - Copy.JPG
    I am clueless about these new cars . no more noise (y)
     
    ojgrsoi, Walt Couch, 47v6 and 2 others like this.
  2. Glenn

    Glenn Kinda grumpy old man Staff Member

    Maybe the dealer meant their mechanics normally damage what they "work" on?
     
    Hellion, dozerjim and Focker like this.
  3. Focker

    Focker That's a terrible idea...What time? Staff Member

    Great work! :bananatool:
     
  4. FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Am I seeing that correctly - I didn't realize the engine was mounted sideways (transverse i believe its called?) on those Renegades?
     
  5. heavychevy

    heavychevy Sponsor

    X2 on transverse engine. My first view too..!
     
  6. garage gnome

    garage gnome ECJ5 welder

    My guess would have been turbo too. I've had that happen where an intercooler hose gets a tear and makes noise. The whistling should have went away when coasting down a hill when no boost was being made.
     
  7. heavychevy

    heavychevy Sponsor

    Love jb weld. Used it even on fuel tanks, it works
     
  8. termin8ed

    termin8ed I didn't do it Staff Member

    Yup. Transverse. Made in Italy. Gotta cuss at them in italian when you work on them.












    And theres alot of cussing...
    :D
     
    hudsonhawk and Twin2 like this.
  9. Admiral Cray

    Admiral Cray I want to do this again.. Staff Member

    A friend of mine had an Austin America and it threw a center main bearing cap, only had three main bearings. He replace the main bearing cap with an aluminum one made out of a piece of aluminum. The engine/trans case was repaired with sheet metal screwed on to cover the hole and then JB weld over the metal to seal it from leaking...

    It was still running last I heard...
     
    heavychevy and ITLKSEZ like this.
  10. ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    A rock punched a hole in my dirt bike's clutch cover around 8 years ago. I limped it back to the car, and I threw some JB Weld on it when I got home. Haven't touched it since.
     
  11. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    20 plus years on the case on the 350 warrior where the chain took it out.