1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T90 Interlock Plunger And Tower Replacement

Discussion in 'Early CJ5 and CJ6 Tech' started by jmoreau002, Sep 27, 2016.

  1. Sep 27, 2016
    jmoreau002

    jmoreau002 New Member

    Joined:
    Jan 20, 2014
    Messages:
    22
    Does anyone have one of these laying around that can take a measure of this interlock plunger? This is the pill (similar to the D18 pill) that floats in between the shift rails towards the back of the shifting column.

    The previous owner of this heap must have tried to assembled at one point and left it out. The plug is still there however. I have just rebuilt the T90 with Novak's kit and am at the point of rebuilding the shifter. The parts for this little **** is expensive. The shift rails look ok, but the shift forks look sketchy, specifically the holes where the roll pins connect the fork to the rails.

    Also, does anyone have any experience with Omix-Ada shift tower?
     
    Last edited: Sep 27, 2016
  2. Sep 27, 2016
    jmoreau002

    jmoreau002 New Member

    Joined:
    Jan 20, 2014
    Messages:
    22
    Additionally, I am pretty sure I can make this from some steel rod and just grind it to the proper dimension. I have only found one source, and they wanted $28 for metal pill. No thanks.
     
New Posts