1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T14 Transmission Bearing Retainer

Discussion in 'Builds and Fabricators Forum' started by Robert Barrix, Jun 18, 2020.

  1. Robert Barrix

    Robert Barrix New Member

    Does anyone know where I could find a very good condition bearing retainer for a T14 Transmission?
     
    Robert Barrix, Jun 18, 2020
    #1
  2. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    let me look and p.s. this should go in the classified section
     
    sterlclan, Jun 18, 2020
    #2
  3. FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    I got one from Herm a few years ago...always worth a try....don't know if member Daryl is checking in much these days, but could try a direct PM to him, or contact him through the FB page. I'd suggest posting a WTB in the classified section here - good chance one might pop up. Don't know if there is a difference in the FRB for the v6 vs the I6, but you might want to specify that as well.
     
    FinoCJ, Jun 18, 2020
    #3
  4. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    I have one out of the boys 70 with a v6 let me know if that helps.
     
    sterlclan, Jun 21, 2020
    #4
  5. Robert Barrix

    Robert Barrix New Member

    Not sure. It appears that my 1971 CJ-5 was manufactured 11/1970. From Herm it has the I6 bearing retainer that probably was not used in 1970 model years...…. So, now I wonder if the input shaft is the longer 11.5 in. or the more available 10.5 in. Guess I'll have to measure that as well.
     
    Robert Barrix, Jun 22, 2020
    #5
  6. nickmil

    nickmil In mothballs.

    I’d put an ad in the classifieds. You will need to specify if for the I-6 or V-6 as they are different.
     
    nickmil, Jun 22, 2020
    #6
  7. Robert Barrix

    Robert Barrix New Member

    That's the cool part. It is the I6 retainer that is original on the V6 engine...….. It also has the bellhousing w/o adaptor.
     
    Robert Barrix, Jun 22, 2020
    #7