Exhaust Pics, V6 4 Speed

So, once I did the T18 swap on my Jeep, the stock y pipe was in the way of the front driveshaft (the trans is almost 3' longer than the 3 speed). I took it to an exhaust shop to get modified but I'm unhappy with how they routed it...the crossover from the right to the left is lower than the trans skidplate and I know it'll get smacked on a rock.
Anyone with a 225, stock manifolds, and a 4 speed, I'd like to see a pic of your exhaust coming off the RH manifold.

 

I have duals, snuck it down the passenger side frame rail. I'd like to have single exhaust. When I do the fuel injection probably going to take the passenger around the front of the engine and t in. Couple of the guys here did that ( norcal69 I think) have the pics saved somewhere.
I just couldn't find a good route otherwise thst wouldn't be low ( plus my rear main drips just enough I don't want to smell it..)

 

http://www.earlycj5.com/xf_cj5/index.php?threads/148540/page-6#post-1686416
this is Kyle’s post, it’s what I copied. I know it’s headers but you can still use same route.

 

My crossover is behind the transfer case.

 

I know a 4.3 isn't exactly the same but I'm gonna use some heavy wall pipe and run it under the waist of the bellhousing and in front of the hips of the sm465 transmission. I might go a size up and plan on some self clearancing.

 

I had a 231 but went around the front of the oil pan from passenger side and picked up the down tube on drivers side. I can post pics next week.

 

I'm starting to understand why you have 4 kids...

 

It's not for my sweet talking.