1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

ramsey winch & PTO Found

Discussion in 'Early CJ5 and CJ6 Tech' started by rdsar2k, Sep 19, 2008.

  1. Sep 19, 2008
    rdsar2k

    rdsar2k New Member

    Joined:
    Sep 18, 2008
    Messages:
    11
    Hello all
    I am new tio this forum and am needing some help. I am restoring a 1955 WillysM170 Jeep Ambulance and when looking for parts I found a winch andwouldlike some info on it. The PTO adater is a DP-1 and the winch is a DPR-200R. I was wondering value and what the model numbers may mean. The PTO adapter has two sticks

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. Sep 19, 2008
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,144
    The winch is pretty much a standard ramsey, worth about $200 or so.

    The PTO is somewhat rare & very desirable, these can go for ~$600 on Ebay.

    If you want to know more in general on ths kind of stuff have a look at my page listed below-

    H.
     
  3. Sep 19, 2008
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    The pto and winch look almost new:) Sweet find! I'm running the same setup on my cj6 Have you bought the pto and winch yet? What's he asking? I'd be happy giving $300 for the PTO setup but they can go alot higher and some times can be got for less depending where you are.
     
  4. Sep 19, 2008
    Homebrew2

    Homebrew2 Member

    Dunlap, CA
    Joined:
    Aug 17, 2007
    Messages:
    511
    Great score on the PTO!!!

    Does anyone have a source for the fairlead, ie, for the 14" wide spool?
     
  5. Sep 20, 2008
    rdsar2k

    rdsar2k New Member

    Joined:
    Sep 18, 2008
    Messages:
    11
    Well Ibought the set up and I paid alot more than 300!. I thought that since I had never seen the PTO two stick before it was worth the gamble. It was a complete system with the drive shaft bearing and all mounting brackets. It all turns and engages and all wer full of oils.
     
  6. Sep 20, 2008
    rdsar2k

    rdsar2k New Member

    Joined:
    Sep 18, 2008
    Messages:
    11
    I decided to sell it on ebay. Its not right for my M170 dag nab it.
     
New Posts