1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

HEI Distributors

Discussion in 'Early CJ5 and CJ6 Tech' started by cw pup, Jun 4, 2010.

  1. cw pup

    cw pup New Member

    Ok, I searched but couldn't find what I'm looking for, hoping you guys could help me. I have two even fire HEI distributors but I need one for an odd fire engine. My question is, can an even fire distributor be modified to become an odd fire distributor? I would really like to go with the HEI on my 225 going into my next project. Thanks in advance.

    cw
     
    Last edited: Jun 4, 2010
    cw pup, Jun 4, 2010
    #1
  2. Warloch

    Warloch Did you say Flattie??? Staff Member

    Go to HERE - Parts list found with a search as I posted it a few weeks ago.
     
    Warloch, Jun 4, 2010
    #2
  3. cw pup

    cw pup New Member

    Thanks Warloch, I knew I could count on you guys!

    cw
     
    cw pup, Jun 4, 2010
    #3
  4. Warloch

    Warloch Did you say Flattie??? Staff Member

    Found the parts list (didn't have time before) so I will add it to help with others that might search and hit this thread.

    NAPA part #s
    RR194 - CAP
    RR173 - ROTOR
    RR204 - COIL GROUND STRAP
    IC18SB - COIL
    MP105 - PICKUP ***
    TP45SB - IGN MODULE
    RR230 - CAPASITOR + TERMINAL BLOCK

    CARQUEST
    30-1693 - REBUILT DISTRO
    DR-32 - COIL
    DR-443 - COIL CAP COVER
    DR-447 - DIST CAP
    DR-318X - ROTOR
    DR-31A - GROUND STRAP

    CHECKER
    DR400 - CONTROL MODULE
    DR451 - CONDENSOR + TERMINAL BLOCK
    DR427 - PICKUP COIL

    75 BUICK APOLLO OR 76 SKYHAWK USED FOR PART NUMBERS
     
    Warloch, Jun 5, 2010
    #4
  5. Snafu

    Snafu New Member

    AHH! Just the info I needed for this distributor.)
    Award an atta boy to each one.

    Ed :tea:
     
    Snafu, Jun 5, 2010
    #5
  6. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Has anyone done this recently that might have a cost estimate? Thanks.
     
    ojgrsoi, Jun 5, 2010
    #6