The M47 is basically an aluminum version of the M45 with an overdrive gear bolted on the back.
I could ask my dad. Is Boyertown to far?
I almost wrapped it around a tree this morning. :whistle:
The to-do list is long. And expensive. :cry:
I’m reaching a point where less skill and more money is needed. Gauges, lights, fuse panel and...
That article is from January. Has anything happened since?
I found the elusive air bubbles in the right rear line, took it out for a drive, and the brakes are FANTASTIC. On loose gravel, the rears lock up...
I just ran down and checked. On the back of the f- head, right?
Mine is a 1/8” NPT to compression elbow. It would probably be easier to deal with...
The male is 1/8” NPT
My ace hardware has them at the far end of the plumbing isle. Not sure what their official name is.
The ones with a white border are optional.
While I was waiting for daylight, I moved the coil buckets down in their mounts for another inch of lift up front, and I installed the sway bar....
Brakes are bled (always a fun job to do alone), now I’m just waiting for daylight. :susp:
See, now that’s cool. It actually looks like a lamp.
A few observations:
I’m not happy with the clutch. I could use less than half of the travel I have. Total engagement is in the first 2” of pedal...
I thought about what would happen if my clutch malfunctioned without brakes, and I decided against going any further. :)
The one little section of line I recycled from the car had a bad leak at the LF hose connection. Serves me right for re-using old junk.
I drove it!!! :bananatool::bananatool::bananatool::bananatool::bananatool::bananatool::bananatool:
I have an issue with a brake line, so I didn’t...
Separate names with a comma.