I've always pulled and installed them as a unit. I use a harbor freight ATV lift to wheel it in place and hoist it up. To me this seems cleaner...
I'm interested in the V6 badges if you would be willing to ship those
Can you elaborate? Why only use first from a standing start?
Overdrive on 4.27 is like having 3.41 axles. Isn't that a bit much for the F head? I don't have a ton of throttle left at 50 mph with 5.38 and...
If you're running 5.38 an overdrive is a great improvement for road driving. It made a world of difference for me. Even if you only go 45 MPH it's...
I have a F134 equipped Jeep with 5.38 and overdrive. Also a 225 with 3.73 and a T14. I really enjoy driving the 225 more. I like the rumble, the...
Thanks for the replies. I ordered a replacement cap from Gates, hopefully I can just swap the gasket.
This is a V6 application and it does have a return fuel line from the fuel pump. So I don't need a vent then? Thanks for the help
Thanks for the reply. Any tips on a part number for a replacement? Searching around a see a lot of caps listed as "non-vented", is that...
So I filled up my gas tank today and shortly after made a right turn. This made me realize my gas cap leaks. I have an under seat plastic tank....
https://www.facebook.com/marketplace/item/674639697158554/ Probably beyond practical saving but lots of interesting stuff there
Mine went AWOL so I can't help, sorry
If you want to go Spicer I have one of that type. If you're interested let me know your zip code and I can figure out shipping to get a price
That wouldn't last a day in Michigan at that price
I need to replace the knuckle seals on the Dana 27 on my 67 CJ5. I've sourced the new seals and reviewed the procedure in the service manual. I'm...
I have one of those in mine also. It's a nice switch. Feels much better than the stock type
10W-30 is what the Jeep service manual calls for so I don't expect that is the issue. The US Army manual for the M38A1 lists 55 MPH as cruising...
Would be the coolest ice cream truck in the neighborhood.
Has anyone tried this product? https://torqueking.com/product/777/closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles/
Clutch cross tube. Bellcrank where one end is attached to the clutch pedal and other end to clutch fork. This was superseded later by a jacketed...
Separate names with a comma.