1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Search Results

Search Again
Page 1 of 10
  1. mike starck
    Post

    Need Recomendation For '62 Radiator

    That is the same experience I had with aluminum replacements for my 20004 wrangler.Separation between tank and tubes. .Went to a O.E.M. Mopar...
    Post by: mike starck, Jun 1, 2022 in forum: Early CJ5 and CJ6 Tech
  2. mike starck
    Post

    Power Steering Return Fitting

    I am using those banjo fittings on my saginaw application w/flare fittings.Worked great although as Fireball said you may have to dress the...
    Post by: mike starck, May 6, 2022 in forum: Intermediate CJ-5/6/7/8
  3. mike starck
    Post

    Windshield Glass Replacement - Need Some Advice

    they have changed owners since I had that glass installed.All bets are off on recomendations The glass was ordered from a outside supplier...
    Post by: mike starck, Nov 7, 2021 in forum: Intermediate CJ-5/6/7/8
  4. mike starck
    Post

    Toe

    1/8" has always worked for me and yes you do need to align front to rear so fronts are pointed straight ahead and roll back and forth a bit to...
    Post by: mike starck, Jun 4, 2021 in forum: Early CJ5 and CJ6 Tech
  5. mike starck
    Post

    On The Road After 45 Years

    Mark, congratulations. I know it's been a long haul and I know you have more plans in the works but this is a real milestone. So happy for you to...
    Post by: mike starck, Jun 1, 2021 in forum: Flat Fender Tech
  6. mike starck
    Post

    Will Bell Housing Interchange?

    Yes standard BUICK/OLDS/PONTIAC bolt pattern to GM transmission.The jeep specific bell housing such that you have has a jeep part number and a...
    Post by: mike starck, Mar 12, 2021 in forum: Early CJ5 and CJ6 Tech
  7. mike starck
    Post

    under coating

    To the original question.It was very common to have the dealer apply undercoating at the time of purchase.This could be any manufacture line.That...
    Post by: mike starck, Mar 9, 2021 in forum: Early CJ5 and CJ6 Tech
  8. mike starck
    Post

    Set Of 'must Get' Mill And Lathe Items

    Congratulations !
    Post by: mike starck, Mar 5, 2021 in forum: The Tool Shed
  9. mike starck
    Post

    Make Exhaust Gaskets?

    Recently made exhaust header gaskets for my 225 with hedman headers. I used .041"annealed copper from McMaster-Carr that worked great and was...
    Post by: mike starck, Feb 23, 2021 in forum: Early CJ5 and CJ6 Tech
  10. mike starck
    Post

    Removing Ross Steering Box From Veh.

    Pulled the box from my '67 by putting on jackstand and remove steering wheel and outer column.Pull box and inner shaft right out under jeep.Went...
    Post by: mike starck, Jan 28, 2021 in forum: Early CJ5 and CJ6 Tech
  11. mike starck
    Post

    Dana 44 Setup

    I too have setup several used R&P sets.If the ring gear was worn to the point of having a ridge on the tooth that would be scrap. Looking at the...
    Post by: mike starck, Jan 25, 2021 in forum: Early CJ5 and CJ6 Tech
  12. mike starck
    Post

    Mis-matched Clutch Linkage On 1963 Cj5

    The bellhousing appears to be a '60s ford piece that uses a different style pivot then a GM or Jeep. You will need a ford throwout arm to work...
    Post by: mike starck, Jan 18, 2021 in forum: Early CJ5 and CJ6 Tech
  13. mike starck
    Post

    Dual Tank Systems

    I have a inboard engine in my boat with BOSCH f.i. on a 383 chev.The fuel supply is delivered to the engine by a low pressure electric pump.Then...
    Post by: mike starck, Jan 5, 2021 in forum: Early CJ5 and CJ6 Tech
  14. mike starck
    Post

    Need Pics Or Parts Diagram For 67 Cj5 W/225 V6 Throttle Linkage Assembly

    I have the linkage piece that goes from carb to firewall.let me know
    Post by: mike starck, Dec 12, 2020 in forum: Early CJ5 and CJ6 Tech
  15. mike starck
    Post

    Oil Pan Replacement

    I have a spare dauntless oil pan if you are interested. PM me for details and pictures. mike
    Post by: mike starck, Dec 6, 2020 in forum: Early CJ5 and CJ6 Tech
  16. mike starck
    Post

    Fuel Tank Installation

    also used uhmw strips between tank and floor. 3/16 " sounds good.Mcmaster-carr if not available local.
    Post by: mike starck, Nov 30, 2020 in forum: Early CJ5 and CJ6 Tech
  17. mike starck
    Post

    Parking Brake Delete Questions

    The cane e-brake handle should work just fine. I have a 1966 ford f-100 w/same setup and 11" brakes and the E-brake works very well.Doesn't take...
    Post by: mike starck, Nov 28, 2020 in forum: Early CJ5 and CJ6 Tech
  18. mike starck
    Post

    Reading Spark Plugs

    Can't blame the spark plug regardless of brand.The deposit is the result of excessive oil or coolant or something contaminating the fuel.
    Post by: mike starck, Nov 25, 2020 in forum: Intermediate CJ-5/6/7/8
  19. mike starck
    Post

    What Year Was This Rear View Mirror From?

    [ATTACH] 1971 renegade II .Also used a short and one long sun visor as mirror was mounted off center
    Post by: mike starck, Nov 24, 2020 in forum: Early Jeep Restoration and Research
  20. mike starck
    Post

    Corn Head Grease Questions

    One for each side and you will have some left over. mike
    Post by: mike starck, Aug 31, 2020 in forum: Early CJ5 and CJ6 Tech
Showing results 1 to 20 of 196 Next >
Search Again
Page 1 of 10
New Posts