4F134 engine, Carter YF, single action mechanical fuel pump, IAY distributor ignition with points. I've been having issues with my F head not...
So I filled up my gas tank today and shortly after made a right turn. This made me realize my gas cap leaks. I have an under seat plastic tank....
https://www.facebook.com/marketplace/item/674639697158554/ Probably beyond practical saving but lots of interesting stuff there
I need to replace the knuckle seals on the Dana 27 on my 67 CJ5. I've sourced the new seals and reviewed the procedure in the service manual. I'm...
Has anyone tried this product? https://torqueking.com/product/777/closed-knuckle-lubricant-for-closed-knuckle-4x4-front-axles/
Hello, I have a friend in southeast Michigan looking for a T14. Apparently the one in the Jeep he bought is toast. Any leads are appreciated....
https://www.facebook.com/marketplace/item/5070061086404581/ If you scrap the generator the trailer becomes pretty cheap.
I rebuild the Dana 44 rear axle on my M38A1 a year or so back. It's a tapered axle, 5.38. I had rebuilt it because the yoke was loose, as in you...
This came on a Dauntless I bought that had a non-standard transmission adapted to it. Is this what you call a BOP bellhousing? It looks like it I...
Continuing to clean out parts I'm not going to use. These are parts for conversion of Dana 18 to twin stick configuration. Take off condition...
This came attached to a Dauntless I bought. It's a wide ratio Ford toploader adapted to a standard BOP bellhousing and large bore D18. Output is 6...
https://www.facebook.com/marketplace/item/1551259161909722/
I was looking for some replacement bolts for the dashboard on my Jeep. The large pan head straight blade screws weren't doing it for me. I found...
See below
Rugged Ridge mirror kit. Mounts using windshield frame screws. Quick removal and you can keep the mounts in place if you want. Lightly used....
I bought some stuff from RockAuto planning to put a HEI on my dauntless. I ended up coming across a Delco distributor that works well so I'm not...
A while back here someone alluded to there being a best order or procedure to fitting the grill, hood and fenders. I'm about at that point now in...
I'm putting together my CJ5 with the V6 presently. The previous owner had a mechanical oil pressure gauge installed and disabled the oil light on...
Hello, I have a M38A1 that was stripped of military hardware by a previous owner. The rear of the tub appears to be a replacement as it doesn't...
Hello, Does anyone have a line on current stock for a wide V6 radiator? The core on my old one is 22"*17". I find tons of listings for the...
Separate names with a comma.