Is the tach for the 304 the same as the 258? Quadratec sells a single part number for a 76-86 CJ. A friend has a factory tach from an '80...
I did but upon further inspection of the frame it's toast. So now it's scrap :( At least I Have a '73 cab and front clip...now I need a frame!...
YOu mean a trailer...or a tow rig? We just tore my '67 J3000 RV down to the frame...I don't plan to rebuild the RV but with the 165" wheelbase I...
I will give that a try. Thanks! :)
I have the D-300 installed in my MJ and I need to get the vent fitting. The hole is there but no fitting at all. Does anyone know what size...
Well I am finally about to put the 4wd AW-4 and D-300 in my MJ. I have the new 21 spline input in the D_300 and the spacer/adapter bolted on. I...
Yeah the shackle bushing are the give point with this. It has caused the front half of the spring to try to turn down and out which is what I am...
Everthing else is good. That was one of the first things I checked...I had a comanche pop one on the trail a few years ago and walked the front...
It doesn't seem like the frame or the hanger itself is bent. THe hanger actually appears to have twisted clockwise If looking at it from...
When I got my CJ5 the passenger front shackle hanger was tweaked and it's bothered me more and more. It doesn't really seem to be getting worse...
My '78 5 with 304/t-150/3.55's and 31's averages 12. I've seen a best of 15 and I still don't know how I got it...I've never been able to again....
I actually ended up doing this...only had to remove 1/4" or so from the corner and the pan slid right out. Of course getting the upper seal out...
I guess that's what I'll be doing. Oh the things we do for these vehicles!!
I am doing a rear main seal and oil pan gasket. I know the procedure fine but this is the 1st time doing this on a CJ5. I can't for the life...
Yeah the blinkers work fine. THe back of the lights say stop/turn/tail so I don't know if some don't (obvisouly I realize not all LED's are...
I'm already checking into that.
No rush. My transmission is still 300 miles away and even if it was here I can't afford the rear driveshaft yet (I think I have a front one...
A friend of mine had some of these laying around and he gave me a set. The picture isn't a very good one but in person I love the way they...
I will look into it. Right now I just need to get the 4wd trans and D-300 IN so I can get it functional. I really want to get back to...
Thanks guys. This helps!
Separate names with a comma.