Guys I'm having to replace the oil pan gasket on my AMC 360, I brought one but it's not the right part as it doesn't fit. my sump has a bulge at...
Guys my sump got a good smack the last trip out, I've tried to get the dent out with a slide hammer but I've noted the oil pressure is fluctuating...
Guys what are you using to repair small tears in a bestop soft top (black). I have a few from rubbing on trees etc.
I tried to get some answers to my question through a similar post but no one has chipped in, I've currently got the late model CJ/YJ master and...
Guys, have any if you ever installed a seal at the hub end of a Dana 30 axle. I know you can get seals for the more modern Dana 30 but I'm talking...
Guys does anyone know offhand what size, pitch and length the drive flange to hub bolts are on a CJ. I want to get some socket head bolts to use...
Guys, during the rebuild process after the wheel bearing failure I noticed that on the RHS where the spindle mounts to the knuckle that there is...
Does anyone know if you can fully rebuild the internals on a WARN Locking hub? One of my got a hard time after the wheel bearing collapsed. I need...
Latest issue, this happened on the drive home. Think the wheel bearing has let go [ATTACH] Just another thing to repair
I want to put a twin stick setup on my J/U version Dana20. However I think I'll make my own as to get a kit to Ireland will be costly and I'm sure...
For those that haven’t been following my other post in the Intermediate Tech section then this write up explains how I modified a 20mm bearing T18...
Guys, I've noticed that one of my rear shocks on the CJ6 is leaking, looks like it got a smack and has cracked. They were meant to be Skyjacker...
Following on from my earlier post about a clutch release bearing. Today we pulled the T18 from the J20 truck, 40 years of crud made working...
Hi all, I'm planning a t18 swap to replace my t150 that's currently in my CJ6. The Jeep has done minimal miles but I believe my clutch release...
Finally got my bumpers on, [img] [img] [img] [img]
Been discussed many times before but want honest truth, my leaf suspension bushings are toast, I brought genuine rubber style ones but they...
I'm looking into buying a new brake booster/MC setup as I'm not happy with mine (soft pedal and not enough pressure to lock up). Before I get the...
The Jeep is a pain to start if left more than a day without starting, believe the fuel must be either leaking out or evaporating (carb has been...
I'm posting on behalf of a friend, What's the most cost effective way of taking a intermediate year D30 drum axle and covert it to a disc...
Guys, Just did a tune of the carb now I have my vac gauge, the only thing is I had to do it without the aircleaner on as it's too large and...
Separate names with a comma.