Friend just did the kit from Brennan Metcalf on the front of his early '6 with a 27 front. uses the geo tracker/suzuki sidekick disc that slides...
I would run one and you don't have to run a wire all of the way to the coil, just to the coil side of the ballast resistor mounted right next to...
steel spanner sleeve or steel spanner bushing link below is for 5/16" id 3/8" od 1-5/8 long...
You can get the mechanical switch for cheap from Speedway. Speedway Universal Mechanical Brake Pedal Light Switch
B if you put A against the flywheel, the springs hit the flywheel to crank bolts/studs and won't disengage when you push down on the pedal......
If you want strength and some extra width, then you can do a waggy 44 front with chevy 8 lug outers and then find a dana 60 and shorten one side...
3 hour drive home at 65 on the interstate. wasn't going to chance it.
Could have slid the driveshaft slip joint apart and replaced the joint without pulling the other end... hindsight being 20/20 and all. For...
pic of the fender extensions, they used the early fenders for the extra drop at the tail end. Also cut the rear quarters behind the tire to...
Story from BFG Tires about the Cummins Commando when they were at Easter Jeep Safari. BFGoodrich Garage
Couple things I am noticing. No air suspension, looks like you have Rancho RS9000 adjustable shocks with the incab control (Black control box...
Is the stub shaft long enough and can you find an external wheel hub that will work with your current lockouts or internal lockout hub with the...
Interco currently has 8 31X10.50-15 IROK ND on their cosmetic blemished site for $115 each right now. Shipping will add a few dollars, but still...
The Cummins R2.8 crate motor comes with a vacuum pump that runs off of the cam.
Correct, it is a '72. Updated the main post.
They added 3" to the early style Jeepster fenders and hood. Being they are giving it air conditioning, an intercooler and larger radiator, they...
NV3550 from a TJ with a Dana 300 behind it. Factory 3.73 gears in the axles.
Thanks for the like, but not mine, belongs to a friend and I have just been consulting here and there on the build and thought you guys would like it.
A couple of quick pics to share a friends build of a 72 Commando that got an early nose swap and is getting a new Cummins 2.8 crate motor...
I guess I ended up paying $100 for one. Bought 2 Jeepsters for $300 and sold off most of the parts for $200. I do have the prized V-6 radiator...
Separate names with a comma.