I came across these when going through some old parts. I think I picked them up many years ago at a tag sale. I never ran them on anything....
I'm looking for the shields that press onto the axle shafts (both inner and outer) of a dana 30 out of a 1973 CJ5. Here is a picture from a FSM...
Sorry guys - another exploded view request that i can't seem to find when searching the internet.... My 1973 Dana 30 has a set of Warn premium...
Aside from the axle shaft length, what (if any) are the differences between the '70-'71 offset flanged dana 44 and the '72-'75 centered flanged...
At some point I'll be swapping a dana 30 into my 1960 cj5. The donor axle is out of a 1973 cj5 and will be completely rebuilt - ball joints, U...
I'm building my own "H" shackles for my cj5. Anyone have a set on their jeep, whether they made them or bought them from an aftermarket supplier?...
i'm going to be attempting to set up gears for the first time. I've been doing a lot of reading and it sure seemed intimidating at first, but the...
in the yoke on the dana 30 axle where the upper ball joint sits, there is a threaded split ring that threads into the axle housing. it looks like...
The U joints on the axle shafts of my dana 30 are really stuck in there. It almost looks like the U joint caps have been fused to the axle shafts...
i have a few questions regarding a '72-'75 dana 30 swap into a 1960 cj5. what driveshaft will i need for the dana 30? will a dauntless V6...
I'm curious what rear end ratios the jeepsters used? were they the same as the cj's? F134 - 4.27 or 5.38 V6 - 3.73 or 4.88 is the same...
1) The flanged '70/'71 dana 44 has larger diameter axle tubes than the earlier tapered axle. does the flanged version use U bolts with a larger...
whats a fair price to pay for one of these? i may have a chance to pick one up from a v6 cj5. it wont have the 5.38 gears i want, but if it has...
I saw this auction on ebay yesterday morning. i had some emails back and forth with the seller and ended up buying them from him last night as he...
Anyone have any experience with this eBay seller? He states the mounts are 9/16" tall. Is that the stock mount height? I want to avoid any body...
I have a heater fan motor with relay from a 1991 Chevy Blazer that I'm going to stuff into my stock jeep heater box. The stock jeep fan motor has...
Would a set of stock steel rims from a 1980 CJ7 fit over non finned 11" drums? I know the lug pattern is the same. I have a chance to pickup a...
I'm running a GM alternator on my jeep project, but I can't find one with the clocking I need. I've re-clocked a Ford alternator before by simply...
Does anyone have a 225 freeze out plug that they can measure for me? i need to know the diameter. My 215 takes 1.5" plugs, and is missing 2. I...
Can anyone with the buick 225 tell me the O.D, I.D, and length of their pilot bushing/bearing? I know the dimensions I need for a bearing for...
Separate names with a comma.