Zila, Any idea where to get the OEM mount. I have the radio and want the OEM look. I have a newer radio mounted in an ammo box between the seats.
Chevy71super, Any idea where to get the radio mount you have?
There are several connection points on the back of the key switch you could use. You can also tie it to the run side of the starter solenoid....
I have the Clifford upgrade on my 73 and am happy with it. I had no fit issues. I do not have the water hooked to the manifold. Clifford has...
Does anyone know the normal jets for a Weber 32 carb for a 232 motor? Looking at jet kits for sale, I believe the PO but kn ones listed in the 4...
I have a Weber 32/36 carb. I know that both sides of the carb are not seperated from each other since its mount is just one single hole. Does it...
The dizzy checks good. I believe I have it set too lean. I showed a picture of a plug to a friend and he believes it is too lean. I did the carb...
I will have tp take the dizzy out and check it, thanks.
I did check the firing order and spark plug wire order last night and they are correct per the manual. Thanks
I guess the saying not constant is incorrect. There is a rhythm to it, just not every second so I guess that would mean maybe one cylinder out of...
It runs rough but not constant. The motor actually shakes when it happens. I see the timing change a little when it happens. You can also hear a...
I did make sure they were correct today when I did the plug wire removal test. I also had the old plug wires and tried them, no change. Could it...
I did the check by removing each plug wire at a time and they all acted the same.
I did check each wire with a timing light and all show spark. I also did a smoke check, several times, on the exhaust and did not find any leaks....
I have spark and gas. the motor runs but has a miss.
I have been trying to find a miss with my 232ci and can not fiqure it out. I have rebuilt the Weber 32, changed plugs, plug wires, coil, rotor,...
Separate names with a comma.