Here is my 65 CJ-5. Color os Olive Drab but hard to tell in picture. http://home.swbell.net/tape-rr/cj5.jpg...
Hi. I just put a new Solex on my 65 and it was set perfect from the factory. First off, they recomend a fuel pressure regulator in line with a...
Hi guys, everyone has been so kind in answering my posts, I'd thought I'd share this with you. I got one of those cheap Craftsman lasers for a...
Me again....one thing after another. Hope this isnt too serious. Now that the shackle issue is over, I can focus on the next couple of things....
Yes, it sits slightly higher in the rear. Not too terribly obnoxious though. So ok, safe on the fronts. Would the longer shackles originally on...
Thanks for the reply. You said the front should be more cause for concern? Meaning the shackles should't be plumb? I thought that meant full...
Hope everyone has a good 4th of July. Maybe someone out there can help. I got a cj5 that the PO lifted 4 inches using Skyjacker springs. He also...
Glenn......thank you very much. My curiosity has been satisfied. You are absolutely correct. There is a small hole about 2/3 the way up on the...
I'm wondering then if I got the correct filter element. It is approximately the same height as the cannister itself. It looks like a basket. It...
On a F-Head cannister style (drop in-not spin on) oil filter, how exactly is the oil filtered? It appears to me that the side mounted hose is the...
If it's not one thing, it's another.... I've searched the threads here, and really couldnt find anything... Anyone know of a source for a...
I have taken some time to really , really explain things. I created a word.doc for you all to click and view. Hopefully, this will help you...
ok.....getting really confused here. I am assuming that the fitting under the carb (mounted to the head) is factory and belongs there. I am also...
Thanks for the answer to the first question. As for the second, maybe I wasnt too clear in my description. I confuse myself sometimes...:roll:...
Got a 65 CJ5 and the PO installed a aftermarket water block heater. There were a total of 3 heater hoses coming out of the block. 1 from the water...
Once again my questions have been answered. I'd like to thank everybody who responded to this and all my previous questions. Without this site, I...
I searched the forum and could not find an answer, so I'll post the query here and hope someone might respond. On a 65 cj5 with the emergency...
Thanks Chuck.... It's hell getting old.....first, the memory....whats next? (Dont say it....):mad:
I took both propeller shafts off to replace all 4 u-joints and now I cant remember whech end of the telescoping drive shafts go. If I recall...
1965 CJ in question: Can anyone tell me what the purpose of the rod that attaches to the transmission crossmember and thru one of the mounting...
Separate names with a comma.