Joe, about 10 years ago, I was in the same position as you are now. Over the years, I've done a ton of mods too numerous to list and have a fairly...
Don't bother with clamps - just tack weld the angle to the tube. You might also want to weld a couple of tabs to the angle iron that can be used...
Sorry. I meant when the canoe is on the rack.
Attaching the front rack to the windshield frame sure would be a lot easier but you'll lose the ability to drop the windshield down.
Id look forward to meeting you !:beer:
I didnt really need a canoe but it gave me an excuse to glue up something else for the 55 ;)
Here's an overall view [IMG]
Bought a 14' canoe and didnt want to lay it on the Bikini top. Glued together some 1/2 " pipe along with drilled plates so it can be removed to...
How many pins on the module ? What is the application for the HEI ? ( Is it for a vehicle that had a computer ? ) I mentioned in an earlier post...
On my 55, I just used two grade 8 bolts to make it " permanent " I'm not familiar with the system on a 74. Might be able to bolt two pieces of...
Don't know if this will help and don't remember the specifics but: After installing the 4.3 with an new HEI, I also had no spark. After testing...
Nice job. Great example of do it once and do it right.
A GOOD QUALITY wire stripper tool sure helps out. Small ( 3/8" ?? ) wire loom is sometimes hard to find but cheap and good to have on hand....
Now would be a good time to add a receiver hitch, recovery points etc. Attachment points for custom bumpers ? A welded bolt up front makes a good...
It appears mine is a press in so I decided to just leave it alone for now. Thanks to all for the replys.
I asked a CHP officer about this. As mentioned, he says the law requires you to have one but he also said it doesn't say anything about being in...
Trying to plan ahead before pulling floor panel. Id like to run a hose vent line to a higher point and am wondering about stock vent cap or button...
It's a piece of bar stock about 3' long that I can hammer into the ground and use for a winch point if nothing else available. The big loop is a "...
Another option. [IMG][/IMG] [IMG]
These are some items I've modified and used as various shifters in the past ( before I quit drinking ! ) :beer: [IMG][/IMG]
Separate names with a comma.