My '71 Dauntless CJ5's clutch makes an awful noise when depressed. Throw out bearing?
I have a '71 cj5 with saginaw manual conversion. What length hot rod tilt column do I order?
My '71 has a D 30 with 11 X 2 drum brakes. I have a '77 D 30 with factory discs. The '71 axle is 3:73 while the '77 is 3:54, don't want to...
I bought a set of fender flares for my '71. Here's the problem: They have mounting holes on the back side, how do I get them clamped in the...
It won't shift with engine running, fine when off. Do I have too much clutch or not enough? What else? Thanks, David
For those who have done it, split seal vs one piece seal. I tried with Omix split seal, it kept slipping off the glass. Called a mobile...
What can I do to keep rainwater off of my tools in this box?
Those who have a remote reservoir for your underbody master cylinder, where did you connect the hose to the MC? I'm replacing the single with a...
What guage cable do 6V Jeeps use? Is 2ga big enough? 0ga? Thanks, David
What do I do to flat tow a Jeep equipped with a T90 and Spicer T/C? Both in N, trans in N or t/c in N?
Who sells the 2 hoses that go from the filler neck to the tank? Vehicle is a '71 CJ5 with the V6.
I bought a set of RR sidesteps for my '71 CJ5. There are holes in the frame but these don't line up with any of them. Is this normal for these...
I want to paint the latches, will the nuts fall out to netherland when I remove the bolts?
Does anyone know the paint code for the popular light green that my '71 came with? My tub is stripped of all tags, VIN and paint.
Does anyone have a spare Ross steering shaft, I'm doing a Saginaw conversion and I need a stock shaft 33" long. Both the threads and splines are...
I have 2 left side, rear exit manifolds from rear drive carb'd 231's. They bolt up and clear my new steering shaft but, the exhaust ports don't...
I'm doing a Saganaw conversion on my '71 CJ5, Dauntless. I have Mc Ruff's Kit and Herm's floor mount and bottom bearing for the stock '71 column....
I drilled out the rivets with a 1/2" bit, but the bellcrank won't budge. BFH didn't work what else do I try? Thanks
Does anyone have a sure fire way to pull the steering wheel from my '71 cj. It's a new wheel so cutting it off is not an option. I need it off...
I removed the left side exhaust manifold ('71 cj5 OFv6) to do a saganaw conversion. The rear outlet manifold that I am using has rectangular...
Separate names with a comma.