Hello all, I am currently taking apart a Dana 18 with the larger 1 1/4" intermediate shaft to build a combo D18/D20 for my '74 CJ5. I am asking...
Ok, so some background. 1974 CJ5 258 re-wired with an ezwiring 21 circuit harness. Jeep stored over winter and the battery went down,...
I have the option to buy a rebuilt T-18 that came out of a 77 Cherokee with bell housing and listed as having the Texas Bolt Pattern. The thing...
I went offroading a couple weeks ago and the clutch bracket that bolts to the bell housing started to loosen. Got to the point where I couldn't...
So I finally got the manifolds painted and installed. One of those jobs that seems simple, but just can't go right. I was having the hardest time...
So I bought a used Warn M8000 winch of someone and now it won't work. When I went to look at it, the guy used jumper cables and it worked just...
So I was wondering what people were using for rock sliders/rocker guards on a fiberglass Jeep?? I have a '74 CJ5 with a fiberglass body. Are...
So I re-wired my 1974 Jeep CJ5 over Easter weekend. Part of that re-wire included Autometer guages, one of which was coolant temp. I have been...
So I bought a replacement fuel sending unit and 21 circuit EZ-wire kit. I am almost done with the rewire. Just need coolant temp sensor, fuel...
So I just received my 21 circuit EZ-wire harness last night. I am going to be installing this on a '74 CJ5. I currently don't have a turn signal...
I am re-wiring my '74 CJ5 in the next week or so. At the same time, I plan to change my guages to aftermarket Autometer fuel, temp, oil pressure....
So I am gathering all the supplies to re-wire my fiberglass body, 1974 CJ5. I plan on getting grounding strips from radio shack, but was curious...
So I dropped my gas tank tonight in hopes of simply hooking up a wire to the fuel sender so I can have a functioning gas guage. Unfortunately,...
I am thinking it would be money well spent to re-wire my '74 CJ5 with a new aftermarket harness. The original is all cut up and although the Jeep...
I blew up my rear driveshaft on the highway this weekend (2.5inch lift and no angle adjustment is bad) and couldn't find the front portion of the...
So I have been going through the steps (slowly) on replacing the pinion oil seal on the Dana 44 from my '74 CJ5. I have the diff drained, new...
Can someone please tell me on the passenger side front spring plate if the shock pin should be to the front or rear? ('74 CJ5 in question)...
I am trying to put in my 4wd.com 2.5" lift on my '74 CJ5. I am to the point of re-assembly but am stuck at putting in the bushings into the front...
Hey guys, I am going through putting a 2.5" 4wd.com lift on my '74 CJ5. I have the front finally, and I do mean finally, apart. In the...
So tonight I somehow broke the stud on the bottom driver's side shock mount. Does anyone know where to get one of these for a '74 CJ5 with a Dana...
Separate names with a comma.