Jeff really likes this stuff and is a lot more accurate than me so I mostly just let him at it. [img] We used the Hook and winch again with...
My tube fenders were pretty simple. Page 30 of my build. Call text or message me if you want more details....
They have a lot more than tops from this manufacturer. I just bought several new parts for the project I’m working on. Some of the items much...
This may be bad advice but I’m sure I read it here so.. To get flairs tight I put a tiny dab of anti-seize grease on the flair - where the nut...
This afternoon I dug into the passenger corner. “Dug” seems like the correct term. [img] After blasting through with the paint remover disk I...
Besides some final details just before painting the driver side is done. [img] [img]
The color she picked is actually pretty close to the original Spruce Tip Green. [img] Maybe.. [img]
I’ll take the spare one off your hands. :drool;
THE BOAT.
So the Hook I made worked very well. There were big dents in the light panel and the corner piece. Very light coat of filler has things looking...
It’s not much pressure. If anything broke it would just fall to the ground.
The Hook. [IMG] Power to pull the body apart if I’m not careful. [img] It’s working!! Easy pulls with lots of tapping with a hammer. [IMG]
Got the patch panels welded in on driver side. Everyone needs one of these. Easy to cut 16ga straight, round, or crooked. [img] Ryan isn’t...
It looks like 15/16”. I’d call it an inch. [img]
Bought a new/used speedo from a member here. This one had no outlets/ receptacles for the light bulbs. So a little research I found these. [IMG]...
Stripped down the driver side tub. [img] Weld thru primer on the repair sections. Regular rattle can primer on the sheet metal. [img]
Every 1960s CJ ever… [IMG] Not really jazzed to find PO build the new floor on top of the old floor.
:watch:Do :watch: it:watch:!
I didn’t know that you could get that!! I’m in need.
These things always creep into bigger projects....You're already halfway to a new timing chain!
Separate names with a comma.