Good wheel seals, and don't forget about the stub shaft seals! If the water gets into the axle tubes, you may want to have some Axle housing...
I just did this on a couple of jeeps around here, and here are a couple of tips that might be interesting... FSJ, especially J-Trucks, used...
Not quite sure what you are asking, so see if this helps, Not exactly the right way to do things, but will get you up and running. This is...
Mine kind of wants to stop there, but I don't let it. If you ever see the engagement dogs on the T-case gears, you won't let yours either! Good...
'73 had a Dana 20 in it. I'm not seeing any other options, but who knows with jeep... ---------------- If you have a Dana 20 of '73 vintage,...
Actually, according to the 1974 Factory Service Manual, In '74 the I-6 engine used the Delco 10 SI series internally regulated alternator. The...
Welding cable is a much better idea than 'Battery Wire' from the discount stores. Welding cable is fine strand wire, that means it will carry...
This would be the absolute correct way to wire your off road vehicle for starting & charging. Battery & Starter cables at least 4 Ga. and...
Ignition System, You WILL NEED a resistor for the ignition, Wire or Pot type, at least 1.35 Ohms, or your ignition module won't live. [img]...
Starting & Charging, Quick Wire Diagram. This is NOT the correct way to wire a Delco SI Alternator, but it will work for testing and charging the...
Technically, a wire 'Spooled' (a technical term) forms a 'Winding' (another technical term). A winding around a ferrous metal core is an...
Let me see if I can help you out... Assuming you want to use your factory DuraSpark module and factory Motorcraft distributor, and factory...
I used Spicer for 30 years and haven't been disappointed yet.
If you have a '1 wire' then all you need is a heavy wire on the back. If you have a regular Delco, then you have the correct diagram.
I would say you are good to go with the diagram you picked out. If you need help, let me know and I'll answer any questions you may have.
Caster: That is the wheel self centering after you turn. It's achieved by placing the top ball stud forward of the axle, and the bottom ball stud...
Yes. Stuff will interchange.
Love my little V-8 powered '73 CJ-5! Just wish it had a better transmission...
In the mid year of '74 Jeep changed from breaker points distributor to Prestolite, so you may have either. The quick way to tell is to see what...
Since this was a thread on engine bay wiring, I'll try and help, but I need some specifics... Try here for a proper alternator wiring install,...
Separate names with a comma.