I agree with everybody so far, the rear D44 axle with one piece axle shafts for $150 is a good axle for you. The D44 with 2 piece shafts $75 is...
Well now I feel a little better about misreading the spark plug gap and setting my plugs to the point gap specs.
I have never heard of this company either, but their products deserve taking a look at. I need some Ford PSD manifolds that are very expensive....
It is running very well now that I gapped the plugs properly. It's got a miss at higher RPM's, bad weather around here has kept me from taking it...
The residual valve is only needed if the Master cyl. used was originally designed for 4 wheel disc brakes and you have drum brakes. The return...
One red flag I saw was the OP stating he wants to tow a camper with his 3B. Maybe it's just me but personally I wouldn't, I can't think off hand...
Stupid me!........
Yes I have repo FSM's but I looked on line and it said depending on the distributor either .020 or .022. I'll open them up to .030 and try that....
If you haven't already washed off the cosmoline, you might consider scraping off the bulk of it and saving it in a can. Cosmoline hasn't been made...
I have used semi metallic pads on non power assisted brakes without any issues, and can lock up my tires, just stating my experience. The type of...
When buying parts stay away from Omix Ada brand parts, they are very very poor quality. Yeah I know you'll find they make every part you'll need...
The old distributor is not servicable which is why the new one was installed.
PeteL your reply gave me an idea. I wonder if opening the gap on the plugs would help? I set the new plugs at about .022.
I hate to say it, but just when I was getting a handle on this, it throws me a curve. I installed new plugs and now #3 cylinder is the dead...
It is leaning out in the accelerator circuit. Once up to speed it stops backfiring so just under rpm transition. Try choking it a bit to fatten it...
Well the old cap was definitely bad, new cap helped and made #1 cylinder fire consistently. The #2 cyl is still dead, I swapped wires from #3,#4...
I agree Alan diagnosis is a methodical process. I discovered the coil electrode in the Omix cap is chipped and a piece of it is missing. This...
I have confirmed that #2 is consistently not firing, and #1 will fire intermittently. I confirmed the distributor is a Omix-Ada reproduction...
I have a 59 F head I'm working on for a friend, #2 cyl. is dead and intermittently #1 as well. Plugs & piston tops in both cyls. are oil soaked...
Very nice dividing head you have there blevisay.
Separate names with a comma.