I am working on a CJ7 and removed all the computer stuff and install HEI and a MC 2150 carb. It was running great when the owner got it but i knew...
What size is the ID of the rubber oil hoses? I want to replace my hoses with hard line and i am not sure to use 3/16 or 1/4 line. Thanks
I am looking for a PCV system for my Jeep to get rid of the Draft pipe Looking for the cap that bolts to the valve cover and is threaded for the...
Well now that the Jeep is up and running and i am trying to mediate the leaks here and there. An annoying one that is happening is the Draft tube...
I just changed out all the brake system in my CJ5. I kept everything stock. wheel cylinders, kard lines, soft lines and MC. All new. I bled...
I just picked up a 55 CJ5 and it had the original Willys speedometer. BUT the needle is broke off and it is missing the glass. Is there a good...
My m38a1 only came with one windshied to hood rest. Looking online they are shown to be two different brackets, particular to the left or right...
Well picked up another M38a1. It was listed on Craigslist as "Silly Jeep 1952 1968" I got courious and texted for more info and pics. It looked...
I had an odd and frustrating condition pop up. At first it would have a stumble on acceloration for about 10 seconds or so when first driving the...
A few weeks ago I had a tragedy happen The hood and windshield frame in my Jeep slammed down and broke the glass. I though that was the worst if...
so i was extremely happy that my steering shaft fit fine from box to column when i started out with my first set of motor mounts. when i changed...
I am getting down to putting a gas pedal in the Jeep. I have a YJ pedal but it is not going to work. I did not have. factory 2A pedal when i got...
I put on my clutch chain setup the other day. Kind of eyeballing it and also i have a brace on the frame that prevents me from going back any...
My starter was was off my motor when i got it. Does anyone know what the length and size the bolts are for the 225 factory starter?
So I have a t86 (with T90 guts) and a large hole single stick Dana 18. This was pulled with a V6 and it all is going into my CJ2a. I rebuilt the...
I picked up a Dana 18 from a friend of mine last weekend. i am cleaning it up now and fortunately it looked like it was rebuilt at some point...
I am going to start installing my gauges for the flatty. This is a repop Omix gauge. Is the fitting on the back of the gauge an AN fitting? If...
Working on my SPEN trailer. I want to repack the bearings but I am trying to find an oil seal for it. Finding the correct seal has been a...
I have had this Scrambler project in the shop for a month or so now. I wonder why I cant get my Flatfender up and running. :( A friend of mine...
I picked up this little SPEN trailer about 2 weeks ago. It popped up on FB and since i was trailerless and i have a bad small trailer addiction, i...
Separate names with a comma.