Good deal with windshield and glass intact. $500 https://rapidcity.craigslist.org/pts/d/rapid-city-old-jeep-hardtop/7694502379.html
Installed one piece crank case vent hose. [ATTACH]
Before you cut them off, here’s something to try, I had same problem at one time. Your bolts are loose (spinning), there isn’t much of a lip to...
07332 Knob,Red
Installed new new fuel tank fill hose today. The Crown hose seems to be good quality, the fit was perfect. Sure glad we can get reproductions for...
I picked mine up from Ace HW, in those expensive pull out tray bins, I think labeled GM door bumpers. Fit and look perfect.
I suggest you prepare to pull timing cover and check condition of chain, gears and alignment of timing marks on cam and crank gears. Here is...
Yes, compression. I put gauge in plug hole to validate on compression stroke.
Sounds like you’re making progress. Keep it simple and follow the 23 steps, it’s really not that complicated. It’s good that you validated that...
A couple reference links for more research HEI's EXPOSED Good read on installing HEI (again!) - Off-Road Forums & Discussion Groups...
Yours looks just like mine when I first installed. I took fan blade off and engine fired right up, did minor adjustment for timing. Then purchased...
Put the top on. Old Kayline still holding up. [IMG]
Replaced 50 year old park light lenses [IMG] [IMG]
Just to get closure on this issue, here’s how I remedied the issue. I purchased a 1” fan spacer from Oreillys (they have 1 and 2” spacers on wall...
Anyone know of a fan spacer to resolve the clearance issue between blades and vacuum advance? A 1” spacer should work. Hopefully something from...
Thanks, takes a lot of patience and the heat gun is your friend. [IMG]
Applied decals today. [IMG] [IMG]
Ultra Scotch-Brite pad (grey) and black paint strip. [img] [img]
[IMG] [IMG]
Wise decision to slow down and see what options you have for mounting the box, you only want to rebuild it once. Here's some reference photos from...
Separate names with a comma.