Have any of you upgraded your tied rod and used heim joints? How long of 1" o.d DOM tubing should i buy? where am i supposed to measure on each...
what ohms are read at empty and full?? trying to match a sending unit.
what diff oil is recommended and how many ounces/quarts? dana 44 w/ detroit locker dana 30 w/ TrueTrac limited slip, worm gears brake fluid,...
has anyone used Herms dual res m/c? here are my questions Herm said to cut my plunger because the stock one is too long. but if i cut my...
i just put my axles back together and noticed that my spicer u-joints came with this small fitting that screws into one of the caps. what is this...
what clutch cable are you using with the sm465/d18? i went to install the old cable not thinking how much longer my new set up is and my cable...
all you SM465 users. it seems i will have to do some cutting and welding to get the original crossmember to fit. did you fabricate a whole new...
what size brake lines are recomended for disc? or will the old lines work fine on my 70 cj5? i'm using drum in the rear so i can reuse that line.
Will they help with braking? i bought the hermtheoverdriveguy dual reservoir unit for disc brakes yesterday and a friend told me that these valves...
i have rust all through out the races and i know i will need new bearings. will these clean up and still be usable? i heard an emery cloth works...
i just got my diffs back from the shop and my front axles were left out. i noticed that the u-joint on my right axle was wasted. can i just...
what was the stock length of the shackle offered on the 70 cj5?
anyone use this carb? i got with my jeep. it needs a rebuild but i think it might work well. i was using the edelbrock performer before and had...
i have done about 9 pages of google reviews on these things. i just got a pair for the rear and i have found another set for the front. what are...
well, i have had many projects but not one has made it to a forum. so this will be my first build where more than just my friends will get join. i...
"True Trac for a Dana 30 low pinion axle bought for a '95 ZJ" can i use this truetrac in my 1978 dana 30?
Will the TJ ring and pinion dana 30 4.10 gear set will work in my 78 dana 30? found a good deal just want to know if i should pull the trigger.
are there any other models that i can use a tilt steering column from? or is easier to buy one direct (ex: ididit)?
Im going to run 33" tires and i was wondering if you experienced any rubbing on the rear fenders? did you have to cut them?
will the rear d44 stock 4.10 gears out of an 08 JK work in my 70 cj5 d44?
Separate names with a comma.