How'd you get it shut off, block off the carburetor inlet?
Another zombie thread reawakened! [IMG] Thanks to you fellas I know I have Trico style arms and blades with the Wrist type connection and it's...
Yep, that is the Mr. Gasket #1651 (says so in the description). Thank you. I've heard it mentioned here often but never seen one installed in...
Seconded. Is that the Mr. Gasket #1651?
That's an extreme temperature tacky grease (as in a typical 14 oz grease gun cartridge). Unless you're talking about using it for your kingpin...
Great info in this thread. My valve covers were installed upside down but with the filler cap on the driver's side. They will be fixed. I think...
Those tags are all pretty thin aren't they? Rather unimpressive and barely substantial. :booo: :bow: I'm just a young buck. Brass wool then?
#0000 Super fine steel wool is very gentle but being steel is decently aggressive at the same time. Seconded on the brass toothbrush, Brasso,...
Got any more parts?
Rochester 2GC (2-barrel) carburetor with manual choke. Looks like your (bypassed) heater hose is acting as a makeshift throttle reducer. That's...
I thought the 'beehive' style lens was held in place by a circular wire spring that you pried out/off, which in turn released the lens and allowed...
If I were you I'd create a build/rebuild/project thread for your Jeep, WITH photos, where you can have a running tally of your inquiries, answers,...
[IMG] Zombie thread! Flarestat 105 switches are rare and big bucks ($100+) on that popular auction site (ebay). Can't find a source for new...
Ah, I figured it must have been custom or unique to the brand of driveshaft... but it looked "necessary" or just another accessory to get. I...
If they're in the grille and about 4" diameter, those are the parking lights (also turn signals). Have you thought of just adding one of many...
Another zombie thread. Zoinks! [IMG] But good info is good info no matter how stale it is. I was debating on the merits of bolting the tailgate...
Not to beat:dhorse: this subject to death, but THIS ^ Anything not needing a super smooth finish OR if you're painting the rough cast surface of...
EXCEPT there's "new technology" spray cans out there (aka 'Any Angle Spray') where you can spray it upside down (for those hard to reach areas) so...
I had a can or two of Rust-oleum's "tall can" (FREE 25% More) 15 oz. semi-gloss black in which the nozzle clogged before I was able to finish a...
I'm a primer kind of person mainly in the effort of ending up with more layers of paint (= Good), and a primer coat shows all the imperfections....
Separate names with a comma.