Morton Peak Fire Lookout Tower. Sab Bernardino National Forest.
Do keep in mind that increasing the shackle does far more than just raise the suspension height. It changes the pinon angle, in the front can...
1968 flat top, bottom wipers. Hood prop. [IMG]
1968 flat top, bottom wipers
Whether you use lock-tite or not, retorque the nuts. Some years ago I had custom springs made. The shop owner told me to drive a week or two to...
Adding to the confusion. Changed my oil yesterday. My dipstick seals to the block without a tube. A PO had scratched out the "4" qts. It is P/N...
What Oldpappy says: cord and soap.
No thanks, I'll just walk.
Regardless of hold down design. I've always used a distributor wrench. Indispensable.
Options are limited by your imagination. This has work for me for 20+ years. Actually the first mod I ever did on my jeep. [IMG] [IMG]
In looking at your pictures it appears to me that your pitman arm is upsidedown. As such, any measurement would be wrong until corrected. And the...
Back when I used to work in the area I'd shop here on occasion. Harvey's Complete Jeep Shop aka Jeep Solutions 5901 Paramount Blvd, Long Beach,...
Tim is correct, stencil. That's what the factory drawing says. 4WDStencilEarlyDrwg1200 by CJ Joe posted Oct 19, 2021 at 4:51 PM
Fluid level is normal and I probed the booster and it is dry. What I don't understand is if there is air in the system the characteristics would...
It is a dual circuit system. 1" bore Corvette style MC w/ 8" booster. The MC (both times) was bench bled and installed. Put a level on it and...
Had a hairy road experience on Saturday. I was driving the jeep for a few local errands into town. On the way back, doing about 63 on a slight...
Separate names with a comma.