Here is a interesting upgrade: Belleview Winch Brake Upgrade
Here is how I have the throttle return spring setup. [IMG]
Please post the links to the rotor, caliper and other parts. Cool mod!
As indicated above, I plagiarized CJ Joe's routing in the front. Unfortunately I think his thread has suffered the Photobucket issue. Here are the...
I have a 225 with block-hugger headers and a rear tank, and I was able to tuck the pipes inside of the frame. I plagiarized CJ Joe's...
I was thinking of making one on my lathe out of piece of Delrin (Acetal) tubing that I have. From what I can find, Acetal has an 'Excelent'...
Now if you ever sell it, you can list it as a MILITARY Jeep on Craigslist!
There is a port right above where the filter goes. On the passenger side of the engine. It should be where the mechanical oil pressure meter is...
I used some stainless steel philips screws with nylon washers. Here is a picture when I was mocking up the gauges.
Don't know if you looked at some of the online suggestions: How to Quiet an Air Compressor – 6 Noise Reduction Tips - AIR PSI I found that...
I went with a custom auto glass shop here in Spokane WA. I took them the replacement weatherstrip that I bought from Walcks, the old glass and my...
What's the piece that extends off the axle (no not the tire :susp:) and more importantly, can I delete it? My disc brake is hitting it.
Thanks! Might be time to buy that borescope I was looking at...
What tow bar are you using with these shackles?
I got the fork, throw out bearing and pivot stud from Novak
Just finishing up on a year plus project and I've started to drive it around the local parking lot. I've got a new clutch with a resurfaced...
Got the windshield installed and hood on. Delusional enough to think I might be able to drive it this weekend! :bananatool: [ATTACH]
I mounted my 3pt belt to the rollbar by drilling and welding in a bung, similar to this but not threaded....
I am 'finishing' up on a frame off that I started over a year ago. I have done most of the work myself other than the sandblasting and engine...
Used the HF gun for sealer and primer. Worked flawlessly! Switched to the Devilbiss Finish Line for base and clear only because I own one.
Separate names with a comma.