Hi, When my Jeep has been sitting for a few days. I do have to crank alot to get it started. It needs fuel because if I put a few drops of fuel...
Hi, I have a simple question, Does anyone have the spec for timing using a timing light. Going trough internet, I read all kinds of things,...
Hi, I am looking to add a shim to the rear spring leafs to eliminate the left leaning on a M38. I am looking for a set of longer u-bolts on one...
Hi, I need to replace a radiator on a CJ3A. I saw some at Ebay at $129 and others at $500??. What is good and sufficient? Anyone had...
Hi, Is is possible to fit a chromed headlight bezel on a M38? I am cloning a M38 to a CJ3A. If so, which bezel model should I start with? Thanks.
Chopped it already Will make a 3A out of this M38. Thanks. YH
Hi, This bracket is supposed to be the generator's bracket. Understanding that I will move to an alternator, do I still need this bracket or I...
Hi, What is the name of this body part and is it still available? Just starting a new project. Thanks. [ATTACH]
I spent alot of time last summer around the gauges. When I acquired my jeep...no gauge was working. I had to investigate them one by one. Like...
Luckily I got it on ebay at $ 75. YH
Finally solved this misterious Issue. The Omix ADA 17901-01 is also 1 7/8'' C/C (Which also does not fit. I finally got a TSM 399202 (or Spectra...
Searching deeper into the web, I think the replacement bushing should look like this 7275 one. Which is the right one?[ATTACH]
Hi, I ordered a replacement bushing for the lower steering column. I am actually far from my jeep and can't physically verify the measurments....
Hi, here is a web picture of a 1974 dash. Can anyone tell me what the unknown button stands for. My CJ5 has a blank hole in there....
Solved! The Drive Gear was loose on it's shaft. Disassembled the rear output housing, Got everything apart and Epoxyed the Gear. Works like a...
Thanks, Makes a lot of sense. Will take it off and report. YH
The rest of the items to complete the puzzle are the SW 448856 driven Gear. Preliminary researches[ATTACH] on internet says that the internal...
Hi, My speedometer has been far off since I own this Jeep. (It reads way down). Got a new cable, a new speedo. It was still down and worked for...
Yes, Everything looks stock on this jeep but the more I work on it, I think it is possible that different parts were brought in over the years....
Vibrations are now Gone. Read carefully the Tom Woods Drive Shaft website, got 6 degrees wedges and longer U-Bolts and then....No more Vibration....
Separate names with a comma.