Bummer, the Jeep had a great 4 month run and then I got the phone call. Grandpa, there's a hole in the engine (actually, the oil pan). Any ideas...
I bought this basket case two years ago. Finally finished it up this weekend. Every part disassembled, cleaned, painted and reassembled with new...
I installed new races and bearing in my V6 Ross Steering Box. I set the bearing load using shims and seemed ok. I was doing a shake down cruise...
Installing a 22" radiator on my 69 CJ5 V6 and I noticed that the fan is well below the center of the radiator. I can't believe that the engine is...
After 3 long months, my Waldron exhaust for my 69 CJ5 V6 finally arrived. My basket case was missing the heat riser. Luckily, I ordered two of the...
Working on the parking brakes now and have a choice between an original style pull handle or converting to a foot style lever off of a later Jeep....
Me, Son and Grandson finishing up the wiring on the Basket Case Rebuild. It's been a long 3 year and still counting project. This site has been...
My brake pedal seems to be too low at rest. Any one happen to have the measurement for a dual master cylinder from a 69 CJ5? This photo is with...
I have a 69 CJ5 that was a basket case and having an issue with the brake pedal is hitting the steering column. The pedal also seems to be a lot...
What feeds the brake light indicator located in the late 60's speedometer cluster? There is no switch besides the 2 that turn on the brake lights...
Note that if you replace your temperature gauge, you will need to move the A buss\wire . Original has a bus bar between the fuel and temp gauge....
I noticed that there is some sort of coating on the tips of shift forks on my T14. Has anyone had any luck recoating these? If so, what was used,...
I wasn't to impressed on how the PO "fixed" the broken front shock mounts. I removed the tab, fabbed up some replacement pins and then drilled out...
Separate names with a comma.