At 62, I’m often wondering what I used to know that I can’t remember forgetting….
The smaller end is threaded 5/16-18, and the larger end is 3/8-16. Overall length is approx 2-5/16". Note the traces of "Buick Green" on the...
I may have just found the answer to my own question. The double-ended stud looks very similar - though not identical - to this "GM Engine Mount...
I'm pretty sure this came off my Dauntless at some point, but don't know what it is or where it went.... [IMG]
If you want to explore possibly having your problem carb professionally rebuilt, send a PM to Scoutpilot above. He runs Old Jeep Carbs LLC (...
The 7-blade fan you're referring to is indeed from an AMC straight six. I bought one of those same fans last year, and found that except for the...
I can only narrow it down to somewhere between a '69 and a '71. Maybe some of the more knowledgeable ECJ5er's can pin it down closer than that?
Correct - it has a floor starter button / switch.
Thanks very much - that makes sense!
I have a '42 Ford GPW that I'm in the process of replacing the 6V starter motor on. The old starter still works okay, but one of the "ears" that...
I had the same experience - had to switch to the smaller oil filter in order to clear the lower radiator hose. That said, in my estimation, the...
I agree....there really isn't a "correct" location for the Warn decals. Those decals were applied by either the dealer or the owner upon...
I believe this may be the same Signal Stat hazard knob shown in the above photo:...
I bought one of those knobs from this guy several years ago...he runs a parts house for Postal Jeeps, which shared the same wiper knob. You might...
Especially if you're planning to use floor mats, I'd suggest using 1/2" carriage bolts in the front floorboard locations. Hex heads tend to...
I bought a replacement cable from Deluxe Speedometer in Colorado several years ago (https://deluxespeedometer.com/). It has a steel casing like...
The above sticker indicates that a Kar Kit was installed on the vehicle. These were not Jeep factory components, but aftermarket kits made by Air...
I'd always thought there were only two versions of the V6 accelerator pedal linkage - the hanging pedal type that was OEM on my '67, and the later...
Here's one of the more interesting Jeeps I saw at Ironman on Friday - a 1971 Renegade II. David said only about 200 of these were made - maybe he...
I was on a singular mission on that particular visit, though I freely admit there were many other parts I saw and lusted after in my...
Separate names with a comma.