For Sale Price Lowered V6 Buick Power Steering Bracket And Pump

I consider this to be the "mid height" power steering pump mount. Higher than some as it bolts completely to the cylinder head, but lower than the actual high mount setup. Works with HEI distributor.
Included is a "keyway shaft" power steering pump and pulley.
Pump condition is unknown, has oil in it that will be drained before shipping. The bracket is two pieces and consists of the rear mount made of aluminum and front mount made of steel.
No hoses will be included in sale.
$75 plus the ride.

 

My research always pointed to the 3-piece high position bracket to clear the front dump manifold. That's what I'm using.
However, I'm not sure I ever considered this mid height bracket arrangement.

 

I have a complete Dauntless v6 here with front dump manifold attached and a short section of exhaust pipe in place......
Think engine removed with a sawzall.....
I can see if it will bolt up if you like.

 

I think this pump/mount was used originally on the 350 Buick V8 back in the ‘70s.
-Donny

 

I mocked it up on my spare engine.
At first it looked like it might fit, but it misses clearing by about 1".

 

I think your correct.
The steel bracket is stamped 350-455

 

Bump

Price lowered to $50 plus the ride.

 

PM Sent

 

Sold