1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1971 Commando Oil Pump Screen

Discussion in 'Jeepster Commando and Commando Tech' started by Hhale, Feb 10, 2021.

  1. Feb 10, 2021
    Hhale

    Hhale New Member

    Dallas
    Joined:
    Jan 17, 2021
    Messages:
    1
    Gents - Recently got my hands on a 71 Commando that has a V6 dauntless, 3 speed auto tranny and a frame/body that has minimal rust. It sat for the past 8 years in a garage until I got my loving hands on it.

    Gave the crankshaft bolt some pulls with the socket wrench to no avail... it was seized up. Lubed the internals beyond belief and let it sit for a few days, it turned over and surprisingly she started. Vacuum leaks and just about every fluid was leaking all over as well. To be expected. Pretty sure last time it was driven and it went dry on oil causing it to overheat/seize.. it was put in the garage and hasn't been touched since.

    Anyways I'm addressing the oil problem first. The oil pump pickup screen is clogged/gummed up and I can't seem to find a replacement part. Any leads? It can probably be cleaned but I was going to try and replace before I clean. I have the pump gasket and oil pan gasket already.

    Thanks ahead of time for any help. I'll post more pictures of Commando later tonight. Her name is Betty. Vin - 870201768331

    https://photos.app.goo.gl/PpEr7WYUJcea2B6f9
     
    Last edited: Feb 10, 2021
    Ol Fogie, bigbendhiker and Fireball like this.
  2. Feb 10, 2021
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,627
    I don't know where to get a screen, but I had to pipe in to say that's a really solid looking Commando. Nice find!
     
  3. Feb 11, 2021
    jackdog

    jackdog Member

    Finger Lakes NY
    Joined:
    Jul 16, 2013
    Messages:
    526
    Parts sources for Jeepsters:
    Partsdude4x4
    Jeepsterguru
    Jeepsterman
    Not sure you can get just the screen, I usually just clean the unit in the parts washer.
    Nice looking C101
     
  4. Feb 11, 2021
    Snoops

    Snoops Making progress, slow but at least it's forward! 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Idaho
    Joined:
    Sep 4, 2019
    Messages:
    431
    good looking rig!
     
  5. Feb 11, 2021
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,110
    It doesn't have to be for a Jeepster, the 225 is the same as a CJ.
     
  6. Feb 11, 2021
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
  7. Feb 12, 2021
    jeepdaddy2000

    jeepdaddy2000 Active Member

    Eagle Point oregon
    Joined:
    Jun 24, 2004
    Messages:
    1,132
    The screens are designed to filter out large debris. As long as the screen is intact and the bypass is operational, it is serviceable. I would soak it in solvent/gas:shock: for a couple of hours and then blow it out.
    Sludge in the pickup usually means sludge in the motor. You may want to pull a valve cover and check under there for further "insulation". If so, you may have to wash out the engine internals prior to replacing the pan or the pickup may give you issues again as the goo loosens and gets washed down into the sump.
     
New Posts