1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T-14 to small bore D-18

Discussion in 'Early CJ5 and CJ6 Tech' started by lamar, Apr 15, 2011.

  1. Apr 15, 2011
    lamar

    lamar Member

    greenville sc
    Joined:
    Jan 25, 2004
    Messages:
    327
    I've searched and can't find the answer. Can a small bore transfer case be bolted behind a t-14 transmission? I do have a T-86 rear bearing retainer to use if necessary. If it will work, do I use the T-86 rear bearing or the T-14 bearing?
     
  2. Apr 15, 2011
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,916
    The T-86 rear retainer is milled for the big mouth D-18. Don't know about the T-14.
     
  3. Apr 15, 2011
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    No you cant. The t-14 won't accept the t-86 bearing retainer you need to use a large hole case or have yours machined. A 20 case works good for this and can usually be had reasonable
    Posted via Mobile Device
     
  4. Apr 15, 2011
    lamar

    lamar Member

    greenville sc
    Joined:
    Jan 25, 2004
    Messages:
    327
    Thanks for the quick answers. I think I have a d-20 case that has the oil fill hole on the side like the d-18 has. I'll just transfer the gears from the 18 to the 20.
     
New Posts