1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Emergency Flasher Light Dash Decal

Discussion in 'Early Jeep Restoration and Research' started by Rubicloak, Dec 28, 2020.

  1. Dec 28, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    I know that there is another thread on this here, however it is 10 years old and there was no resolution.

    I am hoping that someone here still has this on their dash or at min the remnants so that exact dimensions can be taken.

    Anyone here able to help preserve another piece of elusive history? Will look like the two pics below
    IMG_0098-1.jpg
    1970-jeep-cj5-renegade-i-11.jpg
     
  2. Dec 28, 2020
    mrtii

    mrtii 1972 cj51986 cj7 2024 Sponsor 2022 Sponsor

    gilroy, California
    Joined:
    Oct 3, 2016
    Messages:
    166
    that is very interesting , was that factory or dealer install
     
  3. Dec 28, 2020
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,709
    Here's some pics from my '71:

    Closeup for the font:
    [​IMG]

    And it's basically 2"x0.5":
    [​IMG]

    [​IMG]

    I forgot to measure how high above the switch it is, but could do that tomorrow.
     
    Beach66Bum likes this.
  4. Dec 28, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    Thank you Roy... Yes that would be helpful. Looks like maybe 3/8's above the point on the nut.
     
    Last edited: Dec 29, 2020
  5. Dec 28, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    Roy, can you also confirm whether or not it has a clear overlay? When I blow up the pic it definitely looks like it has the same clear overlay as the VIN decal.
     
    Last edited: Dec 29, 2020
  6. Dec 28, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    Unsure with 100% positivity, however I have it on extremely good authority by someone in the know that it was factory installed
     
    ojgrsoi likes this.
  7. Dec 28, 2020
    mrtii

    mrtii 1972 cj51986 cj7 2024 Sponsor 2022 Sponsor

    gilroy, California
    Joined:
    Oct 3, 2016
    Messages:
    166
    Does anyone know what yrs this decal was used, was it only on early AMC cj’s
     
  8. Dec 29, 2020
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,709
    I'll see if I can confirm that when I measure the height tomorrow.
     
  9. Dec 29, 2020
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,709
    Actually, looking at my original full res photo, there is definitely a clear overlay. I'll measure the size of it too.
     
  10. Dec 29, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    Thank you, I am guessing 1/16" ish.
     
  11. Dec 29, 2020
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    It would definitely be gone by '73 when the knobs and labels were changed.

    hazardCropped.png

    This is an aftermarket knob, but the original is similar. I don't recall if '72 had that label, but the dash mostly did not change from '71 IIRC, except for the steering column location.
     
    Rubicloak likes this.
  12. Dec 29, 2020
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,709
    Finally got it measured.

    Indeed the clear overlay is about 1/16" bigger:
    [​IMG]

    The bottom of the white decal is almost exactly 3/4" up from the center of the switch:
    [​IMG]
     
    Rubicloak likes this.
  13. Dec 29, 2020
    Rubicloak

    Rubicloak Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    305
    Thank you sir!
     
    Fireball likes this.
New Posts