How Do You Have Your Hydraulic Clutch Master Cylinder Mounted?

How do you all have your Hydraulic clutch master cylinder mounted to the swinging pedals of the 72-75 cj's?

I am going to use the generic yj master cylinder on my pieced together setup. Did you use the stock pedal or use a yj pedal?

Did the yj pedal fit into the hanging pedal frame from the intermediate?

Or did you just fabricate a way for the stock 72-75 clutch pedal to be used?

Do you have power brakes? How did you mount the master cylinder for the clutch in that area?

I'm all ears. Fill me in.

Post pics please of your setup.

 

Yes did Hydraulic on my 75 with manual disc's. I'll try to take pictures when I make it to the barn. Simply though it's not too hard. There are instructions on how to go about measuring and the setup on Novak website.

 

I'm using a pedal assembly from a 81, it has the clutch slave cylinder mount attached. Ron

 

I used a YJ pedal assembly that has the brake switch attached to the pedal assembly. I then bought a LUK LMC 208 master and the corresponding YJ booster and master. 2X4 frame for my CJ2A
go back a page to see more.

 

I used a complete setup from a 81 CJ7 with a 4cyl in it, brake master setup included. I robbed the firewall mount plate(the yellow part)from a 75 CJ5 for position, strength and wire harness plug. I did have to heat up the pedals to get them into position.