1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Is This The Correct 1310 Yoke For A Dana 27 Front?

Discussion in 'Early CJ5 and CJ6 Tech' started by 71CJ54WD, Dec 7, 2018.

  1. Dec 7, 2018
    71CJ54WD

    71CJ54WD Sponsor

    DC
    Joined:
    May 3, 2018
    Messages:
    356
    I am just going through my parts trying to find everything before I start swinging my T18 and new Dana 18 up. One thing that I am trying to do is upgrade the front shaft to 1310 on both ends. I am not at my Jeep otherwise I would rattle off the front axle yoke and compare - so just trying to see if this 10 spline yoke is the correct one for the front axle.
     
  2. Dec 7, 2018
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    No. the 27 has fine splines (26 iirc) and is deeper than a standard fine spline 30 or 44 yoke and they DO NOT interchange despite what some people might tell you due to the depth.
     
    71CJ54WD likes this.
  3. Dec 8, 2018
    Mtnmax

    Mtnmax New Member

    Grand Lake, Colorado
    Joined:
    Jan 1, 2018
    Messages:
    19
    I just did this upgrade. Call Gabe at Northern Drivetrain, he just fixed me up with a 1310 yoke for the front axle. Here's the thread with his info:

    Front Driveshaft Yoke Help/upgrade
     
    71CJ54WD likes this.
New Posts