Need a measurement on a 225V6

I am trying to find the measurement from the back of the engine at the bell-housing flange out to the end of the crank shaft where the fly-wheel bolts on. I need that stick-out measurement. If it doesn't stick out, then I need to know how far in it is. TIA. Walt.

 

Hi walt,I've got one on my stand,I'll check in the am, if someone else doesn't chime before I get time.

 

Thank you Dan.

 

What about crankshaft end play?Or I'am not reading well.????????

 

Dan the end play will only be a couple a thousandths so that won't matter. Tnx for the consideration.

 

The one I have is .685 out.

 

Thank you very much. Appreciate the information. Walt.

 

If you need anything more yell.

 

Dan I could use the depth from the flat flange (at end of crank) to the first step down and also from the flat flange to the bottom of the bore where the small pilot bushing goes. Tnx

 

Walt,from the END of the c/s .627,and 1.880.The ridge where the f/w is mounted is .330.Hope this is what you needed.

 

I measured 2 dauntless engines. Here's the results:
Engine/bellhousing mount to crankshaft/flywheel mounting = .715" ..710"
Crankshaft/flywheel mount to raised crankshaft shoulder ..= .360" ..330"
Raised crankshaft shoulder to bushing recess (outermost) = .675" ..715"
Raised crankshaft shoulder to bushing recess (innermost) .= 1.775" 2.130"

 

I measured the one I have ymmv.

 

Always good to have multiple references for dimensions.
Just shows that the specs are all about the same but not exactly identicle.
The bore depth inside the cranksaft end varies the most.
It's not very important.

 

Thanks Ken.

 

Man you guys really come up with the data. How can I go wrong. I know this took time and it sure is greatly appreciated. I thought I was going to have to tear down my running jeep to get this. What a huge help. Thanks again jeepers. Walt.

 

Hey Walt,can I put this BACK on the stand now.........

 

Sorry Dan. Of course you can.. I know it was a trick standing on your head with mic in one hand and flashlight in the other and a mirror wand in your mouth.

 

<checks for cameras in shop>Glad I can TRY to help,you are welcome Walt.