1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

oddball frame to body mount ?

Discussion in 'Early CJ5 and CJ6 Tech' started by cj6/442, May 24, 2014.

  1. May 24, 2014
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    why is it there ? on the passenger side in the tool box
    I want it gone .....it's leaving the frame this weekend .........

    but what was it for ?
     
    cj6/442, May 24, 2014
    #1
  2. May 25, 2014
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    To add support to the body in the middle of the door well to keep that area from collapsing and or cracking in the door well area.
     
    nickmil, May 25, 2014
    #2
  3. May 25, 2014
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    but mount is only on 1 side?
     
    cj6/442, May 25, 2014
    #3
  4. May 25, 2014
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,420
    because that's the area for under seat gas tank . they didn't change body mounts when tank moved to rear . I don't see no reason to remove mounting bolt in tool box area :D:D
     
    Twin2, May 25, 2014
    #4
  5. May 25, 2014
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,118
    :iagree:

    This has come up before although most people are actually wanting to know why there's no mount on the drivers side & if they should add one, not remove the one from the passenger side :D

    Actually I believe this is a carryover from the M38A1 that has a gas tank that extends below the floor level.

    H.
     
    Howard Eisenhauer, May 25, 2014
    #5
  6. May 25, 2014
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    well the last trip I kinda pushed the exhaust up a little climbing a ledge, and the pipe is real close it taps on the mount ,,,
    ,I'm building my sunken tool box in the 6 section and see no need for that mount
     
    cj6/442, May 25, 2014
    #6
  7. May 25, 2014
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Hey Steve, If it was not for the fuel tank under the drivers seat I think you would have seen another mount there under the tank............with a stock chassis and the flex that is inherent I think the extra mounts are a benefit to keep the body from flexing..............just my $.002.
     
    tarry99, May 25, 2014
    #7
New Posts