1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

part # FOR 11" DRUMS

Discussion in 'Early CJ5 and CJ6 Tech' started by cj6/442, Oct 13, 2015.

  1. Oct 13, 2015
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    looking for the yr 11" drums were offered so I know what to ask for or just a part #.thanks
     
  2. Oct 13, 2015
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    74-78 Jeep / AMC .............11" finned rears common number is Raybestos #2344R ...........Go to Rock Auto.com
     
    Last edited: Oct 13, 2015
  3. Oct 13, 2015
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Pick drums for a '72 CJ-5 if you don't want finned.
     
  4. Oct 13, 2015
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,513
    Napa 440-1123
    11" non-finned 72 CJ5
    44.95 in Jan 2015
     
  5. Oct 13, 2015
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Last edited: Oct 13, 2015
  6. Oct 13, 2015
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,513
    shrug
    "Quality is like buying oats...."
     
  7. Oct 13, 2015
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    so what are the best shoes to buy ,are any better than others .... this is for a off road rig ,,,,,not much road travel
     
  8. Oct 13, 2015
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    I don't need the drums mine are smooth,,,,,, I just need shoes
     
  9. Oct 13, 2015
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    I run 11" jeep in the back
    and 11" bronco in front nothing is different except for backing plates.....shoes should interchange
     
  10. Oct 13, 2015
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    I've heard of drum brakes before. Do you have a hand crank starter too? ;)
     
  11. Oct 13, 2015
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Are you looking for it to stop better? Ceramic linings or mixture there of seem to work the best............Semi Metallic's might work but I doubt you would see much benefit until you heated them up.

    Change the pedal ratio a little , that will add more brake force.
     
  12. Oct 13, 2015
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Hummmmmmm, No Comment!
     
  13. Oct 13, 2015
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    for what I need right now Sway need shoes bad .and it's already torn down ..... I plan on possibly changing to disc eventually but that means a few more trips to the junk yard, I run Ford hubs/spindles so the disc setup I have won't work... it's all chevy......
     
  14. Oct 13, 2015
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    I also should have asked for shoes not drums
     
  15. Oct 13, 2015
    oldtime

    oldtime oldtime

    St. Charles,...
    Joined:
    Aug 14, 2006
    Messages:
    3,466
    I have a set of the premium OEM NOS shoes.
    I expect that they are genuine asbestos linings !
    I was going to post them for sale on the forum anyway.
    They are from AMC Jeep and these are brass rivotted not bonded junk.
    These are premium shoes and they have yellow zinc coated cores.
    They actually have thicker pads than the Stock CJ's used ( the cores are ever so slightly smaller)
    Also the pads are grooved for heat dissipation.

    I have a 1 complete set for both front and rear axles.
    Fits the 11" x 2" Jeep / Bendix drums.
    Excellent Quality !
     
  16. Oct 13, 2015
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    the hand crank option was discontinued by '59 ......or I would rock that against those plastic 40k+ jeeps ..... for what tis jeep does drums are fine ,,,,,,,,for now :)
     
  17. Oct 13, 2015
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    11" premium riveted shoes from NAPA were $27
    #UP10AR

    in stock and already on the jeep .thanks guys
     
  18. Oct 14, 2015
    sdcj6

    sdcj6 Sponsor

    San Diego
    Joined:
    Sep 25, 2002
    Messages:
    366
    Of course he doesn't.... Hand crank starters came after the rope pull style that Steve has!
     
New Posts