1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Picked Up A 71 For A Buddy Of Mine......

Discussion in 'Builds and Fabricators Forum' started by Norcal69, Jul 25, 2016.

Tags:
  1. Jul 25, 2016
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,547
    Picked up this little gem last Friday evening. Some of you guys from the bay area California may have seen this jeep before. I purchased it from the original owners son. It was last licensed in 1982 and appears to only have 27,000 mi. All work done to it was preformed by Archer Brothers. Specs are: Even fire 231, SM420, 3.73 gears, Power locks front and rear, flanged axle, Discs on the front 11" drums on the back with ebrake cables and hardware, front and rear tanks, and much more.
    The story was that the owners father purchased it new in 71 and was in the process of installing the sm420 and 231 when he developed brain cancer and died. He said that his father had big plans but didn't know what they were. While removing all of the junk from the inside I stumbled across a complete 3.8 turbo kit with what appears to be all the wiring, computer, ect. Under that I found a back seat and brand new upholstery for the front seats.
    My buddy was given a 59 a couple months ago, but this rig is so clean, we are going to abandon the 59 and get this on the road. It is a far better starting point than I had on my project.
    There is the usual front pillar rust, but that is the only real bad part. We will probably start a build thread at some point.
    I'm kind of a pic whore today........
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]

    [​IMG]
    [​IMG]

    [​IMG]

    After a little steam cleaning....
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    melvinm and Valentino84 like this.
  2. Jul 25, 2016
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,491
    Sweet. You're a good pal. Looks like tons of potential there. So uhhhh........send the '59 to PA ehhh. hahaha.
     
  3. Jul 25, 2016
    aallison

    aallison 74 cj6, 76 cj5. Has anyone seen my screwdriver?

    Green Cove...
    Joined:
    Nov 24, 2006
    Messages:
    1,929
    Looks like a project. What are those black things on the side? Looks like vents?
     
  4. Jul 25, 2016
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,407
    yep looks like project and looks better with all the junk out of it
     
    Chuck likes this.
  5. Jul 25, 2016
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,798
    Great starting point. I bet it was almost really nice years ago before the guy passed. Upholstery kit even came with hog ring pliers? This jeep might be perfect with all the parts and potential.
     
  6. Jul 25, 2016
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,547
    That's exactly why I picked it up. If you were to source the axles with power locks alone you would spend at least $1000. All of the components are there to make a very capable jeep. The black things on the sides are air vents.
    I told my buddy to add $1,000 to it and just start driving it.
     
  7. Jul 25, 2016
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    That turbo is from a late'70s Regal/Monte Carlo. It takes a real unique 4 bbl Rochester-totally different porting to deal w/ positive pressure.
    Nice find with all the upgrades!
    -Donny
     
  8. Jul 25, 2016
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,547
    I got the complete kit as far as I can tell. Carb, Piping, Turbo, Intake, Air box, Computer, Wiring.. ect.
    I'm sure that I'm probably missing a few odds and ends.
     
  9. Jul 25, 2016
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Classic mail order plastic side vents..........either Sears or JC Whitney back in the day.........I still have a pair somewhere that were never installed.
     
  10. Jul 25, 2016
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,547
    When they cut out for the side vents, they cut out the Jeep Stamping.o_O:shock::cry:
     
  11. Jul 25, 2016
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Short of cutting up the body which I would not do , But I have rode in a Jeep with them before and the extra air flow is pretty nice to have.........
     
  12. Jul 25, 2016
    Daryl

    Daryl Sponsor

    Bonney Lake, WA
    Joined:
    May 25, 2006
    Messages:
    2,871
    T type guys love the induction pieces. I have had good luck selling some of that stuff in the past.
    Great start.
     
  13. Jul 25, 2016
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,798
    I am kind of salivating over this pile of junk. Its a bit gross and hard to type with all the slobber on the keyboard.
     
  14. Jul 26, 2016
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    He paid $1k?
     
  15. Jul 26, 2016
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Archer Brothers , my old hood in Hayward , Calif........new Fire Station now going up on the old property....................Pretty Nice , Lots of work do to.........hopefully the rust is not to bad.........I would assume that motor would have to come apart if it has been setting that long.........Era correct accessories from Archer.........roll cage and front down tube kit , tire and Jeep Can Carrier..........I still have mine just like that.
     
  16. Jul 26, 2016
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,547
    The rust is not even half as bad as what I started with on my build.
    Yes. He paid 1k for it. When we added up all the parts that he was going to need to acquire for his free 59 project, we figured he was at least another 1k ahead parts wise.
    When you add up the cost of the flanged 44 with power lock, 11" brakes with e brake hardware.
    Front 27 with power lock and disc brakes
    Sm420 with aa adapter ready to run.

    He stumbled into a well built even fire 231 last weekend that is ready to run as well.
     
    Mike I. likes this.
  17. Jul 26, 2016
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,547
    Tarry,
    It's almost a time capsule. The motor that came with it is just going to be a rainy day project. He sang a guy out of a running built even fire 231 last weekend that will be going in to replace the eve fire 231 that's currently in the jeep. On the plus side, the motor that came in it turns over by hand nicely.
     
  18. Jul 26, 2016
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    I think it's a great score.

    Seems like an oddity being a '71 with an under the seat tank and a rear flanged axle?
     
  19. Jul 26, 2016
    homersdog

    homersdog Tulsa, Ok 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Tulsa, OK
    Joined:
    Jan 8, 2012
    Messages:
    2,351
    The under seat tank must have been added, all 71s were built with rear tanks.
     
  20. Jul 26, 2016
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Yeah...Looking at close ups on my computer it does look added.

    Something doesn't seem right with the dash...The steering wheel cut out isn't stock...Right?

    Do I spy swinging pedals too?
     
New Posts