1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ramsey PTO Winch 246R

Discussion in 'Winches' started by mickeykelley, Dec 31, 2016.

  1. Nov 30, 2018
    mickeykelley

    mickeykelley Active Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,275
    So in studying this diagram, the front is 3 inches tall and the bracket for mounting/sitting on the side angle iron shows a 1" drop so it would be at the 2" height but the rear shows angle height of 2.5. Does that 1/2" rake need to be there? The 1" drop on the front kind of makes sense due to the fairlead, bolts, etc.
     
  2. Nov 30, 2018
    Howard Eisenhauer

    Howard Eisenhauer Super Moderator Staff Member Sponsor

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    5,179
    There's no rake, the rear mount holes sit 1/2" higher relative to the bottom edge than the front. It all comes out level in the end.
     

Share This Page

New Posts