1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Small Garages Or Small Workshops Thread

Discussion in 'The Tool Shed' started by Focker, Jun 24, 2017.

  1. Sep 22, 2019
    neohic

    neohic Member

    Woodland Park, CO
    Joined:
    Mar 29, 2018
    Messages:
    147
    Already have pole barn tin coming for the roof. Should be able to crank it out in a day.
     
    Twin2 likes this.
  2. Sep 27, 2019
    ojgrsoi

    ojgrsoi Retired. Sponsor 2019 Sponsor

    Weatherford, TX
    Joined:
    Dec 30, 2002
    Messages:
    1,871
    Over the summer I built a shed for the lawn mower and misc stuff. It is 10x12 which is the max size allowed in my subdivision. The roof cannot exceed 8'.
    Started here.
    [​IMG]
    [​IMG]
    I built it a little different than the Home Depot sheds. I used 2x6 - 16" on center for the floor and 2x4 - 16" on center for the walls. Windows are from Amazon. I picked that size because they fit between the studs.
    [​IMG]
    inside is paneling from HD. It's inexpensive masonite. I like the look.
    [​IMG]
    [​IMG]
    I put a HF solar panel and a 12v battery (12SLA-7 amp) to power the lights . EDIT: SEE POST #113. The battery is in the ammo box.
    [​IMG]

    The light switch is mounted in the license plate next to a HF voltage gauge I had in my parts box. The first click in the switch operates the outside lights. The second click operate a both the inside and outside lights.
    [​IMG]
    I used trailer lights with the lenses removed overhead installing LED 1157 and 194 replacements. It turned out much better than I expected.
    [​IMG]
    Outside I used 4 LED marker lights in the soffit. That is just enough light so you aren't blinded .I also installed "As Seen on TV" solar motion light by the door. :shrug: So far so good.
    [​IMG]
    [​IMG]
    My wife likes it. I kinda do too.;) My garage seems so big now that I'm not falling over all that stuff.
     
    Last edited: Oct 5, 2019
  3. Sep 27, 2019
    Focker

    Focker That's what I do, I know things and I fix stuff. Staff Member Sponsor 2019 Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    6,139
    Very nice, excellent craftsmanship and imagination. (y)
     
    Lockman and ojgrsoi like this.
  4. Sep 27, 2019
    Jw60

    Jw60 Recovering Jeepaholic

    Sedalia MO.
    Joined:
    Oct 5, 2018
    Messages:
    263
    I like that a lot, the lights and solar setup would be great for most anything.
     
    Lockman and ojgrsoi like this.
  5. Sep 27, 2019
    ojgrsoi

    ojgrsoi Retired. Sponsor 2019 Sponsor

    Weatherford, TX
    Joined:
    Dec 30, 2002
    Messages:
    1,871
    Last edited: Oct 5, 2019
    Lockman likes this.
  6. Sep 27, 2019
    Lockman

    Lockman Since 1975 , It's not my Fault ! :shrug: Sponsor 2019 Sponsor

    White City, NY 14617
    Joined:
    Dec 4, 2018
    Messages:
    443
    Excellent workmanship ! (y)
     
    Focker and ojgrsoi like this.
  7. Oct 3, 2019
    GeorgiaFlattie

    GeorgiaFlattie New Member

    Canton, GA
    Joined:
    Feb 9, 2017
    Messages:
    42
    Why use 2x6's instead of 2x4's if you're not insulating it? Or did I miss that part and it's insulated?

    Great work btw. I think I'm going to copy that solar light setup. Thanks for sharing.
     
    ojgrsoi likes this.
  8. Oct 3, 2019
    txtoller

    txtoller Member Sponsor 2019 Sponsor

    Weatherford, TX
    Joined:
    May 28, 2014
    Messages:
    553
    I used the same marker lights except in blue for my Amp steps on my truck!

    Great job!

    By the way, I saw you towing your little trailer last week. You were headed north on 51! (y)
     
    ojgrsoi likes this.
  9. Oct 3, 2019
    ojgrsoi

    ojgrsoi Retired. Sponsor 2019 Sponsor

    Weatherford, TX
    Joined:
    Dec 30, 2002
    Messages:
    1,871
    The 2x6 are the floor joists. If 2x4 is good then 2x6 must be better? IDK really - I just wanted a solid floor. :shrug:
     
    ITLKSEZ likes this.
  10. Oct 3, 2019
    GeorgiaFlattie

    GeorgiaFlattie New Member

    Canton, GA
    Joined:
    Feb 9, 2017
    Messages:
    42
    LOL I apparently can't read. I thought you used 2x6's in the walls. I built a similar shed and I used 2x8's for my floor.
     
    ojgrsoi likes this.
  11. Oct 3, 2019
    Dauntless1971

    Dauntless1971 Member

    Bend, OR
    Joined:
    Oct 22, 2004
    Messages:
    222
    I build a shed 9 years ago 12 x 16 and used 2x4's for the joists. Looking back now I would not do that again. But I did go with 1 foot on center instead of 16 inches on center. Just two years later I torn it down moved it 20 miles and reassembled it. The floor is still pretty solid only squeaks a little.
     
    ojgrsoi likes this.
  12. Oct 4, 2019
    TuxParkIV

    TuxParkIV New Member Sponsor 2019 Sponsor

    Lanexa VA
    Joined:
    Jul 29, 2017
    Messages:
    32
    That is awesome!
     
    ojgrsoi likes this.
  13. Oct 5, 2019
    ojgrsoi

    ojgrsoi Retired. Sponsor 2019 Sponsor

    Weatherford, TX
    Joined:
    Dec 30, 2002
    Messages:
    1,871
    Ok. I learned something on the automatic voltage controller. Those are built for panels above X Watts. Since my panel is lower wattage (2.5) than the range on the controller (5-45) the controller would not pass voltage to the battery. And you guessed it... the battery does not charge.
    I did some reading and it looks like smaller wattage solar panels don’t require a controller. I bypassed the controller and it's charging as it should.
    I also tested the voltage first thing in the AM and it appears to be just above 12V. If the panel doesn’t have a built in diode it will act like a load when it’s dark and discharge the battery. Hopefully it is all wonderful now.
    If the free HF panel does not work out I have a panel like the one in one post # 105 and will swap it out.
     
    Last edited: Oct 5, 2019
  14. Oct 6, 2019
    neohic

    neohic Member

    Woodland Park, CO
    Joined:
    Mar 29, 2018
    Messages:
    147
    [​IMG]

    ... tan and some kind of green to follow.
     
  15. Oct 7, 2019
    Lockman

    Lockman Since 1975 , It's not my Fault ! :shrug: Sponsor 2019 Sponsor

    White City, NY 14617
    Joined:
    Dec 4, 2018
    Messages:
    443
    Sorry that your Building ' Paper " is upside down ! Hope it doesn't Leak out ! :shock: Just Kidd'n with you ; your doing a great job , by yourself ! :clap:
     
    Last edited: Oct 14, 2019 at 12:42 PM
  16. Oct 14, 2019 at 8:31 AM
    Twin2

    Twin2 wasn't me Sponsor 2019 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    3,806
    any updates
    windows . doors . siding . car port :waiting:


    snow
     
  17. Oct 14, 2019 at 8:23 PM
    neohic

    neohic Member

    Woodland Park, CO
    Joined:
    Mar 29, 2018
    Messages:
    147
    Yup... got a little further on things over the weekend. It gets done when it gets done. Kinda tough when you’re doing it by yourself.
     
    ojgrsoi and Twin2 like this.

Share This Page

New Posts